Simulation Analysis on Welding Temperature Fields of TA15 Titanium Alloys

苏杭; 常荣辉; 倪家强; 杨磊

doi:10.16080/j.issn1671-833x.2011.16.005

您当前的位置：

首页 >

文章列表页 >

Simulation Analysis on Welding Temperature Fields of TA15 Titanium Alloys

更新时间：2026-04-17

- Simulation Analysis on Welding Temperature Fields of TA15 Titanium Alloys
- Aeronautical Manufacturing Technology Vol. 54, Issue 16, Pages: 94-95(2011)
- 作者机构：
  
  中航工业沈阳飞机工业（集团）有限公司
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2011.16.005
  CLC：
- Published：2011
- 稿件说明：
移动端阅览
苏杭，常荣辉，倪家强，杨磊. TA15 钛合金焊接温度场的仿真模拟分析[J]. 航空制造技术, 2011, 54(16): 94-95.

苏杭, 常荣辉, 倪家强, et al. Simulation Analysis on Welding Temperature Fields of TA15 Titanium Alloys[J]. Aeronautical Manufacturing Technology, 2011, 54(16): 94-95.
苏杭，常荣辉，倪家强，杨磊. TA15 钛合金焊接温度场的仿真模拟分析[J]. 航空制造技术, 2011, 54(16): 94-95. DOI： 10.16080/j.issn1671-833x.2011.16.005.

苏杭, 常荣辉, 倪家强, et al. Simulation Analysis on Welding Temperature Fields of TA15 Titanium Alloys[J]. Aeronautical Manufacturing Technology, 2011, 54(16): 94-95. DOI： 10.16080/j.issn1671-833x.2011.16.005.

摘要

薄板钛合金结构在焊接生产中得到了广泛的应用。焊接过程的传热问题十分复杂，焊接过程中的温度分布对于焊接变形有着重要的作用。针对平板TA15 钛合金对接接头，对焊接温度场进行了仿真模拟计算，得出了焊接热循环曲线，并进行了试验验证。经过测量比对，焊接热循环曲线变化趋势与模拟所得结果大体一致，说明了模拟计算的正确性。

Abstract

The sheet titanium alloys use widely in welding field. The diathermanous problem in welding process is very complicated

which signifi cantly infl ect the temperature distributing. The temperature cycle curve was gained by means of simulation. By measuring

the test results were in accord with numerical results

thus the results of simulation analysis were correct.

关键词

Keywords

references

Views

229

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical Simulation of Laser Welding for BT20 Titanium Alloy Mouthpiece by Using the Gauss Heat-Source Model

Numerical Simulation of Interfacial Friction and Transient Thermal Processes in Inertia Friction Welding of GH4169 Superalloy

Design and Application of Multi-Zoned Self-Heating Composite Mold

Numerical Simulation of Laser Welding of Carbon Fiber Reinforced Thermoplastic Composites and Titanium Alloy

Characteristic Identification and Distribution Optimization of Temperature Field of Dry Hobbing Machine

Related Author

陈素玲

李世峰

SHI Qingyu

TANG Tianxiang

ZHOU Jun

ZHANG Chunbo

LIANG Wu

ZHOU Mengran

Related Institution

太原科技大学

CAM Harbin Welding Institute Limited Company

Key Laboratory for Advanced Materials Processing Technology, Ministry of Education

State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment, Department of Mechanical Engineering, Tsinghua University

Department of Mechanical Engineering, Tsinghua University

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：24190 Visits Today：2

⁰