Research on EBW Joint Low Cycle Fatigue Property of TC4 - DT Alloy

唐振云; 毛智勇; 李晋炜; 马英杰

doi:10.16080/j.issn1671-833x.2011.16.010

您当前的位置：

首页 >

文章列表页 >

Research on EBW Joint Low Cycle Fatigue Property of TC4 - DT Alloy

更新时间：2026-04-17

- Research on EBW Joint Low Cycle Fatigue Property of TC4 - DT Alloy
- Aeronautical Manufacturing Technology Vol. 54, Issue 16, Pages: 111-115(2011)
- 作者机构：
  
  1. 北京航空制造工程研究所高能束流加工技术国防重点实验室
  2. 中国科学院金属研究所
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2011.16.010
  CLC：
- Published：2011
- 稿件说明：
移动端阅览
唐振云，毛智勇，李晋炜，马英杰. TC4-DT 合金电子束焊接接头低周疲劳性能研究[J]. 航空制造技术, 2011, 54(16): 111-115/118.

唐振云, 毛智勇, 李晋炜, et al. Research on EBW Joint Low Cycle Fatigue Property of TC4 - DT Alloy[J]. Aeronautical Manufacturing Technology, 2011, 54(16): 111-115.
唐振云，毛智勇，李晋炜，马英杰. TC4-DT 合金电子束焊接接头低周疲劳性能研究[J]. 航空制造技术, 2011, 54(16): 111-115/118. DOI： 10.16080/j.issn1671-833x.2011.16.010.

唐振云, 毛智勇, 李晋炜, et al. Research on EBW Joint Low Cycle Fatigue Property of TC4 - DT Alloy[J]. Aeronautical Manufacturing Technology, 2011, 54(16): 111-115. DOI： 10.16080/j.issn1671-833x.2011.16.010.

摘要

通过对 TC4 - DT 钛合金母材、电子束焊接接头显微组织的分析及焊接接头不同位置疲劳性能的测试，研究了焊接接头显微组织特点，比较了母材与焊接接头不同位置处的低周疲劳性能，讨论了不同应变水平下接头的断口形貌。结果表明，当疲劳应变幅 Δε t /2小于 0.6% 时，TC4 - DT 钛合金母材与接头的疲劳寿命2N f 基本相同，当疲劳应变幅 Δε t /2 大于 0.6% 时，随着塑性变形应变幅的增大，母材与焊接板材上、下层处的2N f 差异逐渐明显，其中母材处的 2Nf 最高，焊接板材上层处的 2N f 最低。

Abstract

The EBW joint of TC4 - DT titanium alloy with thickness of 50mm is conducted to invest to the microstructures and fatigue properties in differrent location of joint

and compared with the base metal of TC4 -DT titanium alloy. Based on the observation for microstructure and testing of fatigue property sample

it shows that the 2N f fatigue span of TC4 - DT titanium alloy EBW joint is equal basically to those of base metal when the Δε t/2 expermental strain amplitude is lower than 0.6%. With the increasing of plastic strain amplitude

the difference between the fatigue span of joint in the upper postion and lower position and base metal occurs obvoiusly

in which the 2N f fatigue span of base metal is the highest

and the lowest in the upper postition.

关键词

Keywords

references

Views

204

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Optimization Study of Hot Isostatic Pressing Process for Powder Metallurgy Inconel 718 Alloy

Microstructure and Properties of TiC-Reinforced 7034 Aluminum Alloy Fabricated by Wire-Feed Laser Cladding

Investigation of HAZ and Its Influence of Laser Cutting 2A12 Aluminum Alloy

Microstructure and Machinability of Inconel 718 Fabricated by Micro Selective Laser Melting

Effect of Diffusion Welding Process Parameters on Microstructure, Properties and Deformation of TiAlNb Joint

Related Author

JIANG Yuhui

XU Lei

YAO Hongrui

WU Jie

TIAN Xiaosheng

CHEN Jiawen

WANG Libo

MI Gaoyang

Related Institution

Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang

Shenyang University of Chemical Technology

School of Materials Science and Engineering, Central South University

School of Materials Science and Engineering, Huazhong University of Science and Technology

School of Mechanical Science and Engineering, Huazhong University of Science and Technology

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：24190 Visits Today：2

⁰