Material Selection and Fabrication of Metal Flat for Titanium Alloy Hot Forming and Superplastic Forming

骆合力; 李尚平; 曹栩; 张喜娥

doi:10.16080/j.issn1671-833x.2011.16.025

您当前的位置：

首页 >

文章列表页 >

Material Selection and Fabrication of Metal Flat for Titanium Alloy Hot Forming and Superplastic Forming

更新时间：2026-04-17

- Material Selection and Fabrication of Metal Flat for Titanium Alloy Hot Forming and Superplastic Forming
- Aeronautical Manufacturing Technology Vol. 54, Issue 16, Pages: 63-65(2011)
- 作者机构：
  
  钢铁研究总院高温材料研究所
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2011.16.025
  CLC：
- Published：2011
- 稿件说明：
移动端阅览
骆合力，李尚平，曹栩，张喜娥. 钛合金热成形和超塑成形金属平台材料选型和制备[J]. 航空制造技术, 2011, 54(16): 63-65.

骆合力, 李尚平, 曹栩, et al. Material Selection and Fabrication of Metal Flat for Titanium Alloy Hot Forming and Superplastic Forming[J]. Aeronautical Manufacturing Technology, 2011, 54(16): 63-65.
骆合力，李尚平，曹栩，张喜娥. 钛合金热成形和超塑成形金属平台材料选型和制备[J]. 航空制造技术, 2011, 54(16): 63-65. DOI： 10.16080/j.issn1671-833x.2011.16.025.

骆合力, 李尚平, 曹栩, et al. Material Selection and Fabrication of Metal Flat for Titanium Alloy Hot Forming and Superplastic Forming[J]. Aeronautical Manufacturing Technology, 2011, 54(16): 63-65. DOI： 10.16080/j.issn1671-833x.2011.16.025.

摘要

介绍了钛合金热成形和超塑成形用金属平台的材料选型和制备工艺研究情况，研究认为，选择高温合金替代目前国外采用的耐热钢材料优势非常明显；钢铁研究总院自主开发的热成形金属平台制备工艺比国外相关技术更加先进，制备的 K403 高温合金热成形平台服役表现良好，具备了生产钛合金热成形和超塑成形金属平台的能力。

Abstract

Material selection and fabrication of metal fl at for titanium alloy hot forming and superplastic forming are introduced. Compared with heat resistant steels

superalloys are more suitable for fabricating the metal fl at. The producing technology of the metal fl at developed by Central Iron and Steel Research Institute (CISRI) has the advantage over the conventional technology. The homemade metal fl at made of K403 superalloy works stably

which shows that CSRI has capability of producing the metal fl at for titanium alloy hot forming and superplastic forming.

关键词

Keywords

references

Views

229

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Hydroforming Behavior of GH3044 Thin-Walled Eccentric Nozzle

Research Progress on Precision Forming of Aero-Engine Superalloy Castings

Advances of Interface Reaction in SiC Fiber Reinforced Superalloy Composites

Stress Relaxation Behavior and Hot Forming Springback Prediction of TA32 Titanium Alloy

Effect of Ethanol Addition in Eutectic Solvent on Electrochemical Polishing Behavior of GH4169 Alloy by Selective Laser Melting

Related Author

CUI Xiaolei

LIU Wei

HE Jiuqiang

YIN Shijie

XIAO Chengbo

ZHANG Pan

WANG Donghong

ZHOU Leyao

Related Institution

Xi’an Aerospace Propulsion Institute, China Aerospace Science and Technology Corporation Sixth Research Institute

School of Materials Science and Engineering, Harbin Institute of Technology

State Key Laboratory of Precision Hot Forming, Harbin Institute of Technology

浙江省机电设计研究院有限公司

中国航发南方工业有限公司

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：24190 Visits Today：2

⁰