Feature Analysis of the Different Materials for Large Bridge Type Machine Tool Column

CUI Lijie; GUAN Dali; LI Zhongkai; LI Chuye

doi:10.16080/j.issn1671-833x.2016.23/24.092

您当前的位置：

首页 >

文章列表页 >

Feature Analysis of the Different Materials for Large Bridge Type Machine Tool Column

更新时间：2025-10-30

- Feature Analysis of the Different Materials for Large Bridge Type Machine Tool Column
- Aeronautical Manufacturing Technology Vol. 59, Issue 23/24, (2016)
- 作者机构：
  
  中航工业北京航空制造工程研究所,北京,100024
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2016.23/24.092
  CLC：
- Published：2016
- 稿件说明：
移动端阅览
崔立洁，关大力，李中凯，李初晔. 大型桥式机床立柱不同材料的特性分析[J]. 航空制造技术, 2016, 59(23/24): 92-94. CUI Lijie, GUAN Dali, LI Zhongkai, LI Chuye. Feature Analysis of the Different Materials for Large Bridge Type Machine Tool Column. Aeronautical Manufacturing Technology, 2016, 59(23/24): 92-94.

CUI Lijie, GUAN Dali, LI Zhongkai, et al. Feature Analysis of the Different Materials for Large Bridge Type Machine Tool Column[J]. Aeronautical Manufacturing Technology, 2016, 59(23/24).
崔立洁，关大力，李中凯，李初晔. 大型桥式机床立柱不同材料的特性分析[J]. 航空制造技术, 2016, 59(23/24): 92-94. CUI Lijie, GUAN Dali, LI Zhongkai, LI Chuye. Feature Analysis of the Different Materials for Large Bridge Type Machine Tool Column. Aeronautical Manufacturing Technology, 2016, 59(23/24): 92-94. DOI： 10.16080/j.issn1671-833x.2016.23/24.092.

CUI Lijie, GUAN Dali, LI Zhongkai, et al. Feature Analysis of the Different Materials for Large Bridge Type Machine Tool Column[J]. Aeronautical Manufacturing Technology, 2016, 59(23/24). DOI： 10.16080/j.issn1671-833x.2016.23/24.092.

摘要

采用数值计算方法，比较了混凝土、铸铁和钢3 种不同材料立柱的静载抗压能力以及冲击力下的瞬态响应，分析数据表明，钢立柱具有最好的承压能力，在相同压力下静变形最小；由于阻尼的原因，混凝土立柱的振幅受到明显限制，冲击力作用下振动衰减的较快，在更加关注减振性能的高速高性能加工领域，采用混凝土立柱是更好的选择。

Abstract

Using numerical calculation method

and compares the static load compressive capacity and impact of the transient response for the three different materials

cast iron and steel concrete columns. Analysis data shows that the steel column has the best bearing capacity and minimum deformation under the same static pressure. Because of damping

the amplitude of concrete column is clearly limited

under the action of impact vibration attenuation faster

more attention in the vibration isolation performance of high-speed high-performance processing field

using the concrete column is a better choice.

关键词

Keywords

references

Views

299

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Energy Collection of Cutting Vibration Based on Piezoelectric Effect and Application of Damping Tools

Strength Design and Optimization of Aviation Filter Assembly Based on CF/PEEK Composite

Research Progress on Ceramic Matrix Composites for Aviation Applications

Research Progress on In-Plane Shear Mechanical Behavior of Silicon Carbide Ceramic Matrix Composites

Design and Experimental Verification of Stitching Forming System for Rigid Sandwich Composite Preforms

Related Author

YANG Yiqing

SHEN Rui

GAO Haoyang

HE Wanlin

ZHAO Hongjie

Related Institution

Beihang University

Capital Aerospace Machinery Co., Ltd.

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34762 Visits Today：240

⁰