Effect of Stiffeners on the Buckling Performance of Composite Rear Pressure Bulkhead for Civil Aircraft

LI Zhongyang

doi:10.16080/j.issn1671-833x.2016.23/24.112

您当前的位置：

首页 >

文章列表页 >

Effect of Stiffeners on the Buckling Performance of Composite Rear Pressure Bulkhead for Civil Aircraft

更新时间：2025-10-30

- Effect of Stiffeners on the Buckling Performance of Composite Rear Pressure Bulkhead for Civil Aircraft
- Aeronautical Manufacturing Technology Vol. 59, Issue 23/24, (2016)
- 作者机构：
  
  中航工业第一飞机设计研究院,西安,710089
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2016.23/24.112
  CLC：
- Published：2016
- 稿件说明：
移动端阅览
李中洋，李东，郭祥. 加强筋对客机复合材料球面框结构屈曲性能影响[J]. 航空制造技术, 2016, 59(23/24): 112-115. LI Zhongyang, LI Dong, GUO Xiang. Effect of Stiffeners on the Buckling Performance of Composite Rear Pressure Bulkhead for Civil Aircraft. Aeronautical Manufacturing Technology, 2016, 59(23/24): 112-115.

LI Zhongyang. Effect of Stiffeners on the Buckling Performance of Composite Rear Pressure Bulkhead for Civil Aircraft[J]. Aeronautical Manufacturing Technology, 2016, 59(23/24).
李中洋，李东，郭祥. 加强筋对客机复合材料球面框结构屈曲性能影响[J]. 航空制造技术, 2016, 59(23/24): 112-115. LI Zhongyang, LI Dong, GUO Xiang. Effect of Stiffeners on the Buckling Performance of Composite Rear Pressure Bulkhead for Civil Aircraft. Aeronautical Manufacturing Technology, 2016, 59(23/24): 112-115. DOI： 10.16080/j.issn1671-833x.2016.23/24.112.

LI Zhongyang. Effect of Stiffeners on the Buckling Performance of Composite Rear Pressure Bulkhead for Civil Aircraft[J]. Aeronautical Manufacturing Technology, 2016, 59(23/24). DOI： 10.16080/j.issn1671-833x.2016.23/24.112.

摘要

本文针对客机复合材料球面框，通过有限元计算，对球面框上的加强筋对结构屈曲性能的影响展开深入研究。球面框球皮采用碳纤维层合板，加强筋为填充PMI 泡沫的帽形加强筋。建立有加强筋和无加强筋两种结构方案，并建立有限元模型进行静力和屈曲分析计算。结果表明客机复合材料球面框的加强筋对球面框结构的屈曲性能和稳定性有一定的改善作用，但对球面框结构的静强度改善作用不大，增加加强筋后球面框的应变和位移变化较小。球面框结构设计时出于成本和制造工艺考虑可以不采用加强筋。

Abstract

In this paper

the research on structure buckling performance due to stiffeners on the composite domed rear pressure bulkhead of civil aircraft is carried out. The dome skin adopts the CFRP laminate and the stiffeners are hat shape stiffeners with PMI foam core. According to establish two categories of structure with and without stiffeners

the static and buckling analyses by using of finite element analysis are carried out. The results show that the stiffeners on the composite domed rear pressure bulkhead have a positive influence on improving the buckling performance and stability of the structure

but the stiffeners contribute less on the improvement of static strength of rear pressure bulkhead. The strain and deflection of the rear pressure bulkhead are improved slightly. So it makes no sense to increase the stiffeners on the domed rear pressure bulkhead from the perspective of cost saving and manufacturing.

关键词

Keywords

references

Views

397

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Optimization of Grid Structure of Carbon Fiber Resin Matrix Composite Rotary Body

Strength Design and Optimization of Aviation Filter Assembly Based on CF/PEEK Composite

Assessment of Technological Advancement Based on Fuzzy Comprehensive Evaluation

Dynamic Measurement Method for Shaft Deflection Angles in Helicopter Drive Systems

Research on Ultrasonic Vibration-Assisted Milling and Grinding of Ceramic Matrix Composites

Related Author

WANG Xianfeng

LIN Guojun

LI Xingze

LIU Hao

Related Institution

Nanjing University of Aeronautics and Astronautics

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34762 Visits Today：240

⁰