Design and Manufacture High Parallel R & D Model Based on the Product Maturity

HUI Wei; JIN Zhezhu; HU Baohua; TAO Jian; SHEN Bo; ZHAO Yiji

doi:10.16080/j.issn1671-833x.2016.23/24.137

您当前的位置：

首页 >

文章列表页 >

Design and Manufacture High Parallel R & D Model Based on the Product Maturity

更新时间：2025-10-30

- Design and Manufacture High Parallel R & D Model Based on the Product Maturity
- Aeronautical Manufacturing Technology Vol. 59, Issue 23/24, (2016)
- 作者机构：
  
  1. 中航工业信息技术中心,北京,100028
  2. 中航工业哈尔滨飞机工业集团有限责任公司,哈尔滨,150066
  3. 中航工业陕西飞机工业（集团）有限公司,汉中,723000
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2016.23/24.137
  CLC：
- Published：2016
- 稿件说明：
移动端阅览
惠　巍, 金哲珠2, 胡保华, 陶　剑, 沈　波, 赵一伋. 基于产品成熟度的设计制造高度并行研发模式[J]. 航空制造技术, 2016, 59(23/24): 137-141. HUI Wei1, JIN Zhezhu2, HU Baohua3, TAO Jian1, SHEN Bo1, ZHAO Yiji1. Design and Manufacture High Parallel R & D Model Based on the Product Maturity. Aeronautical Manufacturing Technology, 2016, 59(23/24): 137-141.

HUI Wei, JIN Zhezhu, HU Baohua, et al. Design and Manufacture High Parallel R & D Model Based on the Product Maturity[J]. Aeronautical Manufacturing Technology, 2016, 59(23/24).
惠　巍, 金哲珠2, 胡保华, 陶　剑, 沈　波, 赵一伋. 基于产品成熟度的设计制造高度并行研发模式[J]. 航空制造技术, 2016, 59(23/24): 137-141. HUI Wei1, JIN Zhezhu2, HU Baohua3, TAO Jian1, SHEN Bo1, ZHAO Yiji1. Design and Manufacture High Parallel R & D Model Based on the Product Maturity. Aeronautical Manufacturing Technology, 2016, 59(23/24): 137-141. DOI： 10.16080/j.issn1671-833x.2016.23/24.137.

HUI Wei, JIN Zhezhu, HU Baohua, et al. Design and Manufacture High Parallel R & D Model Based on the Product Maturity[J]. Aeronautical Manufacturing Technology, 2016, 59(23/24). DOI： 10.16080/j.issn1671-833x.2016.23/24.137.

摘要

设计与制造协同作为并行工程的重要环节，是从设计阶段就开始考虑产品的可制造性，有效减少工艺准备时间，缩短研制周期及上市时间。但如何做到设计与制造有效协同一直是困扰航空制造行业的难题。在原有VPMWindchill-DELMIA 协同研发的模式下，进一步探讨基于VPM 与DELMIA 直接开展设计制造高度并行的研发模式工程应用研究，为实现复杂产品设计制造的协同研发提供新的技术途径。采用VPM-DELMIA 模式，可以提升设计与制造的最大并行程度，让制造部门可以及时了解设计状态，提早开展工艺设计过程。

Abstract

As an important part of a parallel project

the design and manufacturing collaboration has thought about product manufacturability at the design stage

to reduce setup time and shorten the development cycle and time to market. But how to achieve effective collaborative design and manufacturing has been a trouble in aviation manufacturing industry. Using the original VPM-Windchill-DELMIA collaborative research and development mode

based on VPM and DELMIA to further explore to conduct highly parallel direct R D model applied research engineering design manufacturing

can provide new technical approach to achieve collaborative development of complex product design manufacturing. Using VPM-DELMIA mode

the maximum extent possible to enhance parallel of the design and manufacturing

so that the manufacturing department can timely understand the design state

early conduct process planning.

关键词

Keywords

references

Views

403

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on Collaboration and Synthesis Management Framework and System Based on Process

Large Aircraft Assembly Plan and Simulation Technology for Module-Based Configuration Production

Analysis of Manufacturing Enterprise Application System Integration

Modulation of Pore Structure and Properties in Phenolic Aerogels by Cationic Polyelectrolytes

Dynamic Measurement Method for Shaft Deflection Angles in Helicopter Drive Systems

Related Author

张新国

HOU Zhuobing

MENG Jinghui

HU Chengdan

QIN Xinbing

MENG Zhengwei

WANG Luyuan

Related Institution

中国航空工业第一集团公司

AVIC Xi’an Aircraft Industry (Group) Company Ltd.

AECC Shenyang Liming Aero-Engine（ Group） Corporation Ltd.

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34762 Visits Today：240

⁰