Analysis of Main Technological Parameters in Compressor Experimental Blade Injection Deformation

ZHAO Dezhong; WANG Wenhu; JIANG Ruisong; CUI Kang

doi:10.16080/j.issn1671-833x.2017.03.068

您当前的位置：

首页 >

文章列表页 >

Analysis of Main Technological Parameters in Compressor Experimental Blade Injection Deformation

更新时间：2025-10-30

- Analysis of Main Technological Parameters in Compressor Experimental Blade Injection Deformation
- Aeronautical Manufacturing Technology Vol. 60, Issue 3, Pages: 68-70(2017)
- 作者机构：
  
  西北工业大学现代设计与集成制造技术教育部重点实验室,西安,710072
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2017.03.068
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
赵德中，汪文虎，蒋睿嵩，崔康，靳淇超. 压气机试验叶片注塑变形主工艺参数分析研究*[J]. 航空制造技术, 2017, 60(3): 68-70.

ZHAO Dezhong, WANG Wenhu, JIANG Ruisong, CUI Kang, JIN Qichao. Analysis of Main Technological Parameters in Compressor Experimental Blade Injection Deformation. Aeronautical Manufacturing Technology, 2017, 60(3): 68-70.
赵德中，汪文虎，蒋睿嵩，崔康，靳淇超. 压气机试验叶片注塑变形主工艺参数分析研究*[J]. 航空制造技术, 2017, 60(3): 68-70. DOI： 10.16080/j.issn1671-833x.2017.03.068.

ZHAO Dezhong, WANG Wenhu, JIANG Ruisong, CUI Kang, JIN Qichao. Analysis of Main Technological Parameters in Compressor Experimental Blade Injection Deformation. Aeronautical Manufacturing Technology, 2017, 60(3): 68-70. DOI： 10.16080/j.issn1671-833x.2017.03.068.

摘要

航空发动机压气机低速模拟实验台所用树脂叶片注塑成型过程复杂，叶片成型精度由模腔和工艺参数决定。为探索工艺参数及其交互作用对叶片成型精度的影响规律，提出并研究了压气机叶片注塑变形主工艺因素的二次分析方法。首先基于析因试验研究了熔体温度、模具温度等工艺参数对叶片成型变形的影响，揭示了对叶片变形影响显著的工艺参数及其交互作用；再基于响应面方法分析了各主工艺参数及其交互作用对叶片变形的影响规律。仿真试验结果表明，保压时间、熔体温度与保压时间的交互作用等是影响叶片变形的显著因素。

Abstract

Resign blade used in low speed research compressor of aeroengine injection molding process is complex. The precision of blade forming is determined by the cavity and technological parameters. In order to explore the influence of technological parameters and their interaction on blade forming precision. Twice-analysis method of the main technological parameters of the compressor blade injection molding is studied in this paper. Firstly

the influence of technological parameters such as melt temperature

mold temperature on blade deformation is studied based on factorial experiment. Then

the influence rule of the main process parameters and their interaction on blade deformation is revealed based on the response surface method. The results of simulation experiments show that packing time

the interaction of packing time and melt temperature are the significant factors to blade deformation.

关键词

Keywords

references

Views

352

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Strength Design and Optimization of Aviation Filter Assembly Based on CF/PEEK Composite

Research on Ultrasonic Vibration-Assisted Milling and Grinding of Ceramic Matrix Composites

Design and Experimental Verification of Stitching Forming System for Rigid Sandwich Composite Preforms

Electromechanical Behavior of Open-Hole Three-Dimensional Angle-Interlock Woven Carbon Fiber Reinforced Polymer Under Tensile Loading

Research Progress on Matrix Composition Regulation of SiC/SiC Composites

Related Author

No data

Related Institution

No data

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34721 Visits Today：199

⁰