Effect of Surface Treatment on Interface Morphology of Thermal Barrier Coating

YANG Wenhui; MU Rende

doi:10.16080/j.issn1671-833x.2017.08.044

您当前的位置：

首页 >

文章列表页 >

Effect of Surface Treatment on Interface Morphology of Thermal Barrier Coating

更新时间：2026-04-17

- Effect of Surface Treatment on Interface Morphology of Thermal Barrier Coating
- Aeronautical Manufacturing Technology Vol. 60, Issue 8, Pages: 44-49(2017)
- 作者机构：
  
  中国航发北京航空材料研究院航空材料先进腐蚀与防护航空科技重点实验室,北京,100095
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2017.08.044
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
杨文慧，牟仁德. 表面处理对热障涂层界面微结构的影响*[J]. 航空制造技术, 2017, 60(8): 44-49.

YANG Wenhui, MU Rende. Effect of Surface Treatment on Interface Morphology of Thermal Barrier Coating. Aeronautical Manufacturing Technology, 2017, 60(8): 44-49.
杨文慧，牟仁德. 表面处理对热障涂层界面微结构的影响*[J]. 航空制造技术, 2017, 60(8): 44-49. DOI： 10.16080/j.issn1671-833x.2017.08.044.

YANG Wenhui, MU Rende. Effect of Surface Treatment on Interface Morphology of Thermal Barrier Coating. Aeronautical Manufacturing Technology, 2017, 60(8): 44-49. DOI： 10.16080/j.issn1671-833x.2017.08.044.

摘要

采用真空电弧离子镀技术在单晶高温合金DD32 上制备HY5 金属粘结层，通过振动光饰、吹砂2 种不同的表面处理方法改变粘结层表面状态，再在粘结层表面利用电子束物理气相沉积技术制备陶瓷层。研究了不同处理方法对粘结层表面状态的影响；测试了不同表面处理方法下制备的热障涂层的高温氧化性能并对比分析了它们的变化规律。此外，探讨了不同表面处理方法对界面元素成分及失效特征的影响。研究结果表明，通过表面处理可以去除粘结层表面较大的凸起，提高表面平整度，提高热障涂层抗氧化性能。与粗糙界面相比，光滑界面形成的TGO 层均匀致密，Al 含量高。经长时间的高温氧化后，粗糙界面的TGO 层出现明显皱曲现象，陶瓷层开裂剥落。

Abstract

The boat coating of HY5 prepared by arc ion plating was deposited on DD32 alloy substrate. The surface were treated by vibratory polished (VS) and grit-blasted

and then YSZ was deposited on the bond coating by EB-PVD. The microstructures of the bond coating by different surface treatments were investigated. The oxidation resistance of TBCs was measured and compared. Furthermore

effects of surface on interface elementary composition and failure characteristic were studied. The results indicate that both surface treatments can improve the bond coating surface and lead to better oxidation resistance. Compared with TBCs treated by vibratory polished (VS) and grit-blasted

the scale morphology was uniformon flat surfaces. After high temperature oxidation

wrinkling appeared on TGO with rough interface.

关键词

Keywords

references

Views

508

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of Ultrasonic-Assisted Laser Shock Peening on Tensile Property of 7075–T6 Aluminum Alloy

Picosecond Laser Processing of Shaped Cooling Holes in Turbine Blades

Eddy Current Testing and Damage Analysis of Single Crystal Turbine Blade With Thermal Barrier Coatings

Analysis of Thermal Conductivity Behavior of YbandErCo-Doped SmZrOCeramics

Research Progress on Marine Adaptability of Ceramic Based Materials for Thermal Barrier Coating of Marine Gas Turbine

Related Author

SONG Fuyang

WEI Shuai

LIU Yang

MENG Xiankai

CHENG Zilong

LI Yuancheng

ZHANG Xiaobing

MAO Zhong

Related Institution

School of Mechanical Engineering, Jiangsu University

Institute of Advanced Manufacturing and Modern Equipment Technology, Jiangsu University

AVIC Manufacturing Technology Institute

AECC Sichuan Gas Turbine Research Institute

Sichuan University

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34634 Visits Today：112

⁰