Study on Thermal Deep-Drawing Process of TC1 Titanium Alloy Cover Part

ZHANG Zhi; LI Pengliang

doi:10.16080/j.issn1671-833x.2017.08.079

您当前的位置：

首页 >

文章列表页 >

Study on Thermal Deep-Drawing Process of TC1 Titanium Alloy Cover Part

更新时间：2026-04-17

- Study on Thermal Deep-Drawing Process of TC1 Titanium Alloy Cover Part
- Aeronautical Manufacturing Technology Vol. 60, Issue 8, Pages: 79-83(2017)
- 作者机构：
  
  1. 中国航空制造技术研究院,北京,100024
  2. 塑性成形技术航空科技重点实验室,北京,100024
  3. 数字化塑性成形技术及装备北京市重点实验室,北京,100024
  4. 四川成发航空科技股份有限公司,成都,610503
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2017.08.079
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
张志1,2,3，李鹏亮1,2,3，孙宾1,2,3，李均红4. TC1 钛合金端盖零件热拉深成形工艺研究[J]. 航空制造技术, 2017, 60(8): 79-83.

ZHANG Zhi1,2,3，LI Pengliang1,2,3，SUN Bin1,2,3，LI Junhong4. Study on Thermal Deep-Drawing Process of TC1 Titanium Alloy Cover Part. Aeronautical Manufacturing Technology, 2017, 60(8): 79-83.
张志1,2,3，李鹏亮1,2,3，孙宾1,2,3，李均红4. TC1 钛合金端盖零件热拉深成形工艺研究[J]. 航空制造技术, 2017, 60(8): 79-83. DOI： 10.16080/j.issn1671-833x.2017.08.079.

ZHANG Zhi1,2,3，LI Pengliang1,2,3，SUN Bin1,2,3，LI Junhong4. Study on Thermal Deep-Drawing Process of TC1 Titanium Alloy Cover Part. Aeronautical Manufacturing Technology, 2017, 60(8): 79-83. DOI： 10.16080/j.issn1671-833x.2017.08.079.

摘要

针对TC1 钛合金端盖零件的结构特点，分析了零件的成形难点，对热拉深工艺的模具材料、温度、压边间隙、拉深速度等对零件成形性能的影响进行了研究，提出了合理的工艺参数。结果表明，该工艺方法可实现薄壁、大拉深比的TC1 钛合金零件的精确成形，采用空气脱模的方式可获得平面度满足设计要求的零件

为类似零件的取件提供了工艺参考。

Abstract

According to the feature of TC1 titanium alloy cover part

the processing property of the part is analyzed. The influence of some factors such as mould material

temperature

blank holder gap and drawing rate on the drawing formability of TC1 titanium alloy cover part are discussed

meanwhile the appropriate parameters are optimized. The results indicate that the proposed technological method is feasible for the integral forming of thin-walled TC1 titanium alloy with large drawing ratios. Moreover

parts with high quality of flatness can be successfully formed by using air-demoulding method. It provides a technical reference for picking off the similar parts.

关键词

Keywords

references

Views

471

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

薄壁小弯曲半径钛合金管材弯曲技术研究

Dynamic Measurement Method for Shaft Deflection Angles in Helicopter Drive Systems

Assessment of Technological Advancement Based on Fuzzy Comprehensive Evaluation

Large-Distance Straight-Line Datum Construction Based on Laser Collimation

Research Progress on In-Plane Shear Mechanical Behavior of Silicon Carbide Ceramic Matrix Composites

Related Author

李鹏亮

孙宾

张志

李云飞

Related Institution

中航工业北京航空制造工程研究所

中国人民解放军驻沈阳飞机工业（集团）有限公司军事代表室

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34634 Visits Today：112

⁰