Drilling Quality Control of CFRP Based on the Carbon Nanotube Buckypaper

WANG Gongdong

doi:10.16080/j.issn1671-833x.2017.1/2.032

您当前的位置：

首页 >

文章列表页 >

Drilling Quality Control of CFRP Based on the Carbon Nanotube Buckypaper

更新时间：2025-10-30

- Drilling Quality Control of CFRP Based on the Carbon Nanotube Buckypaper
- Aeronautical Manufacturing Technology Vol. 60, Issue 1/2, (2017)
- 作者机构：
  
  1. 沈阳航空航天大学航空航天工程学部,沈阳,110136
  2. 沈阳航空航天大学航空制造工艺数字化国防重点学科实验室,沈阳,110136
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2017.1/2.032
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
王共冬，李南，种强，周丽. 基于碳纳米纸的CFRP制孔质量控制*[J]. 航空制造技术, 2017, 60(1/2): 32-36. WANG Gongdong1,2, LI Nan1, CHONG Qiang1, ZHOU Li1. Drilling Quality Control of CFRP Based on the Carbon Nanotube Buckypaper. Aeronautical Manufacturing Technology, 2017, 60(1/2): 32-36.

WANG Gongdong. Drilling Quality Control of CFRP Based on the Carbon Nanotube Buckypaper[J]. Aeronautical Manufacturing Technology, 2017, 60(1/2).
王共冬，李南，种强，周丽. 基于碳纳米纸的CFRP制孔质量控制*[J]. 航空制造技术, 2017, 60(1/2): 32-36. WANG Gongdong1,2, LI Nan1, CHONG Qiang1, ZHOU Li1. Drilling Quality Control of CFRP Based on the Carbon Nanotube Buckypaper. Aeronautical Manufacturing Technology, 2017, 60(1/2): 32-36. DOI： 10.16080/j.issn1671-833x.2017.1/2.032.

WANG Gongdong. Drilling Quality Control of CFRP Based on the Carbon Nanotube Buckypaper[J]. Aeronautical Manufacturing Technology, 2017, 60(1/2). DOI： 10.16080/j.issn1671-833x.2017.1/2.032.

摘要

进行了钻削预埋碳纳米纸薄膜传感器碳纤维复合材料的试验，钻削结果采用超声波扫描显微镜进行检测。试验结果表明：层间预埋碳纳米纸，可以实时监测钻头位置，根据钻头位置改变进给率，实现对制孔质量的精确控制。采用ABAQUS 对试验方案进行模拟仿真，模拟的结果与试验结果很好地吻合，证明了该方法的有效性。

Abstract

This paper conducted the drilling experiments of carbon fiber reinforced polymer of precast carbon nanotube buckypaper

then the results of the drilling are detected by the ultrasonic scanning machine. The experimental results indicated that the carbon nanotube buckypaper in the interlaminates can monitor the position of the drill bit in real-time. Subsequently

the feed rate can be controlled according to the position of the drill

and the holes quality can be accurately realized. The process of drilling is simulated by ABAQUS

and the simulation result is found to be in a good agreement with the experimental result

which demonstrates the effectiveness of the method.

关键词

Keywords

references

Views

425

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental Study on Rotary Ultrasonic Countersinking of CFRP/Aluminum Alloy Thin-Walled Laminated Structures

Study on Influence of Typical Manufacturing Defects in Autoclave Forming on Mechanical Properties of Composite

Research Advances in Drilling-Induced Defects of Carbon Fiber Reinforced Polymers

Influence of Pipe Diameter on Thrust Force and Damage Characteristics During CFRP Pipe Drilling

A Method for Restraining Axial Force in Process of Helical Milling of CFRP

Related Author

SUN Lianjun

SUN Zhenwen

DONG Song

ZHENG Kan

YANG Yakun

YUE Guangquan

RONG Xiaoyuan

PAN Lijian

Related Institution

Nanjing University of Science and Technology

State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University

Center for Civil Aviation Composites, Donghua University

COMAC Shanghai Aircraft Manufacturing Co. Ltd.

Shanghai Jiao Tong University

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34726 Visits Today：204

⁰