A Method of the Minimal Hole Edge Distance Quick Detecting in the Skin Edge of Aircraft Based on CATIA/CAA

HAN Zhiren; ZHANG Hao

doi:10.16080/j.issn1671-833x.2017.1/2.070

您当前的位置：

首页 >

文章列表页 >

A Method of the Minimal Hole Edge Distance Quick Detecting in the Skin Edge of Aircraft Based on CATIA/CAA

更新时间：2025-10-30

- A Method of the Minimal Hole Edge Distance Quick Detecting in the Skin Edge of Aircraft Based on CATIA/CAA
- Aeronautical Manufacturing Technology Vol. 60, Issue 1/2, (2017)
- 作者机构：
  
  1. 航空制造工艺数字化国防重点学科实验室,沈阳,110136
  2. 沈阳航空航天大学航空航天工程学部,沈阳,110136
  3. 中航工业江西洪都航空工业集团有限责任公司,南昌,330024
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2017.1/2.070
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
韩志仁，张浩，汪建东，曾天. 基于CATIA/CAA 飞机蒙皮边缘连接孔最小边距快速检测方法[J]. 航空制造技术, 2017, 60(1/2): 70-73. HAN Zhiren1,2, ZHANG Hao2, WANG Jiandong3, ZENG Tian3. A Method of the Minimal Hole Edge Distance Quick Detecting in the Skin Edge of Aircraft Based on CATIA/CAA. Aeronautical Manufacturing Technology, 2017, 60(1/2): 70-73.

HAN Zhiren, ZHANG Hao. A Method of the Minimal Hole Edge Distance Quick Detecting in the Skin Edge of Aircraft Based on CATIA/CAA[J]. Aeronautical Manufacturing Technology, 2017, 60(1/2).
韩志仁，张浩，汪建东，曾天. 基于CATIA/CAA 飞机蒙皮边缘连接孔最小边距快速检测方法[J]. 航空制造技术, 2017, 60(1/2): 70-73. HAN Zhiren1,2, ZHANG Hao2, WANG Jiandong3, ZENG Tian3. A Method of the Minimal Hole Edge Distance Quick Detecting in the Skin Edge of Aircraft Based on CATIA/CAA. Aeronautical Manufacturing Technology, 2017, 60(1/2): 70-73. DOI： 10.16080/j.issn1671-833x.2017.1/2.070.

HAN Zhiren, ZHANG Hao. A Method of the Minimal Hole Edge Distance Quick Detecting in the Skin Edge of Aircraft Based on CATIA/CAA[J]. Aeronautical Manufacturing Technology, 2017, 60(1/2). DOI： 10.16080/j.issn1671-833x.2017.1/2.070.

摘要

在新机研制阶段，设计部门提供的工程数据集可能存在连接孔边距不符合规范要求，也可能出现连接孔进入零件的R 区等现象。通过对边距的检测可以检查连接孔边距的缺陷，因此边距的快速检测是一个重要问题。提出了边距提取和最小边距快速检测的算法，利用CAA/CATIA 开发平台，开发了蒙皮边缘孔最小边距的快速检测软件可快速筛选不符合要求的蒙皮边缘孔并标注出来

减少了飞机生产过程中不必要的浪费，提高了生产效率。

Abstract

In the new development stage of aircraft

there may be phenomenons that the edge distance of connecting hole doesn’t conform to the specification requirements and that connecting hole appears into parts’ R area in the engineering data set which provided by the design department. Through the edge distance detection can check the defects of the edge distance of connecting hole

so this rapid detection of edge distance is an important problem. The algorithm of the extraction and rapid detection minimum distance is put forward and a quick detection software that detects the minimal hole edge distance in the skin edge by using the CAA/CATIA platform is developed. The software can quickly screen the connecting hole which is in inconformity to requirement

and then label this hole. The method reduces the waste in the aircraft manufacturing process and improves the production efficiency.

关键词

Keywords

references

Views

931

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Key Technologies of Aircraft Structure Design Based on Knowledge Base System

Application of Simulation Technology in Aircraft Automatic Drilling and Riveting

Rapid Prototyping of Machine Tool Fixture Element Based on CATIA

Rapid Design of Welding Tooling for Aviation Conduit

Rapid Design of CNC Tube Bending Die Based on CATIA/CAA

Related Author

柳振兴

李原

余剑锋

殷俊清

王仲奇

康永刚

李维学

郑国磊

Related Institution

西北工业大学现代设计与集成制造技术教育部重点实验室

北京航空航天大学机械学院

AVIC Shenyang Aircraft Industrial (Group) Co., Ltd.

College of Aerospace Engineering, Shenyang Aerospace University

Engineering Training Center，Shenyang Aerospace University

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34726 Visits Today：204

⁰