Machining Deformation Error Compensation Method of Aluminium Alloy Thin-walled Parts Based on the Ruled Surface Reconstruction

樊建勋; 徐仁乾; 胡自化; 秦长江; 徐韬智

doi:10.16080/j.issn1671-833x.2017.11.099

您当前的位置：

首页 >

文章列表页 >

Machining Deformation Error Compensation Method of Aluminium Alloy Thin-walled Parts Based on the Ruled Surface Reconstruction

更新时间：2026-04-17

- Machining Deformation Error Compensation Method of Aluminium Alloy Thin-walled Parts Based on the Ruled Surface Reconstruction
- Aeronautical Manufacturing Technology Vol. 60, Issue 11, Pages: 99-104(2017)
- 作者机构：
  
  1. 海军驻阎良地区航空军事代表室,西安,710089
  2. 航空工业西安飞机工业（集团）有限责任公司,西安,710089
  3. ．湘潭大学机械工程学院,湘潭,411105
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2017.11.099
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
樊建勋1，徐仁乾2，胡自化3，秦长江3，徐韬智3. 基于直纹曲面重构的铝合金薄壁件加工变形误差补偿方法*[J]. 航空制造技术, 2017, 60(11): 99-104.

樊建勋, 徐仁乾, 胡自化, et al. Machining Deformation Error Compensation Method of Aluminium Alloy Thin-walled Parts Based on the Ruled Surface Reconstruction[J]. Aeronautical Manufacturing Technology, 2017, 60(11): 99-104.
樊建勋1，徐仁乾2，胡自化3，秦长江3，徐韬智3. 基于直纹曲面重构的铝合金薄壁件加工变形误差补偿方法*[J]. 航空制造技术, 2017, 60(11): 99-104. DOI： 10.16080/j.issn1671-833x.2017.11.099.

樊建勋, 徐仁乾, 胡自化, et al. Machining Deformation Error Compensation Method of Aluminium Alloy Thin-walled Parts Based on the Ruled Surface Reconstruction[J]. Aeronautical Manufacturing Technology, 2017, 60(11): 99-104. DOI： 10.16080/j.issn1671-833x.2017.11.099.

摘要

由于薄壁件低刚度特性导致常规单一几何规划编程的数控精加工质量难以保证，根据多步迭代补偿法，提出采用构造直纹曲面补偿面对刀具轨迹进行修正，进而建立基于加工变形误差补偿的刀轨优化算法。最后，利用加工试验进行验证分析，试验结果表明所建立的加工变形补偿方法正确可靠。

Abstract

Due to the low-rigidity of the thin-walled parts

it was difficult to guarantee the quality of NC finish machining by conventional single geometric programming. According to the multi-step iterative compensation method

the tool path optimization algorithm based on cutting deflection error compensation was proposed by reconstructing compensatory surfaces of ruled surface to correct the original tool paths. Finally

the cutting experiment was carried out based on the algorithm. The result shows that the method of the machining deformation error compensation is correct and reliable.

关键词

Keywords

references

Views

506

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Methodology of Dynamic Milling Force Modeling of Thin-Walled Part Considering Force-Displacement Coupling Effects

Research on Ultrasonic Vibration Stress Control Technology of 5B70 Aluminum Alloy Welds

Finite Element Simulation and Rapid Compensation Model for Additive Manufactured hin-Walled Components

Influences of Tool Path on Machining Deformation of Trapezoidal Frame Thin-Walled Parts

Comprehensive Error Modeling and Compensation in Manufacturing of Thin-Walled Parts Based on On-Machine Measurement

Related Author

LI Guilin

HU Xiaobing

WANG Xiaohu

WU Wenbin

HU Teng

ZHANG Hengyi

LI Fagui

LIU Quanshuang

Related Institution

Taihang National Laboratory

School of Mechanical Engineering, Sichuan University

School of Mechatronic Engineering, Southwest Petroleum University

Beijing Spacecrafts Manufacturing Co., Ltd.

Nanjing University of Aeronautics and Astronautics

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34726 Visits Today：204

⁰