CNC Programming and Machining Technology for 5-Axis Milling of Turbine Blisk

ZHAO Wenming; SHEN Qi; WANG Bing; LIU Zhanqiang

doi:10.16080/j.issn1671-833x.2017.15.058

您当前的位置：

首页 >

文章列表页 >

CNC Programming and Machining Technology for 5-Axis Milling of Turbine Blisk

更新时间：2025-10-30

- CNC Programming and Machining Technology for 5-Axis Milling of Turbine Blisk
- Aeronautical Manufacturing Technology Vol. 60, Issue 15, Pages: 58-63(2017)
- 作者机构：
  
  山东大学机械工程学院高效洁净机械制造教育部重点实验室,济南,250061
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2017.15.058
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
赵文明，沈　琦，王　兵，刘战强. 整体叶盘铣削数控编程与加工技术*[J]. 航空制造技术, 2017, 60(15): 58-63.

ZHAO Wenming, SHEN Qi, WANG Bing, LIU Zhanqiang. CNC Programming and Machining Technology for 5-Axis Milling of Turbine Blisk. Aeronautical Manufacturing Technology, 2017, 60(15): 58-63.
赵文明，沈　琦，王　兵，刘战强. 整体叶盘铣削数控编程与加工技术*[J]. 航空制造技术, 2017, 60(15): 58-63. DOI： 10.16080/j.issn1671-833x.2017.15.058.

ZHAO Wenming, SHEN Qi, WANG Bing, LIU Zhanqiang. CNC Programming and Machining Technology for 5-Axis Milling of Turbine Blisk. Aeronautical Manufacturing Technology, 2017, 60(15): 58-63. DOI： 10.16080/j.issn1671-833x.2017.15.058.

摘要

整体叶盘有良好的结构完整性、轻质化、装配环节少、装配精度高等优点，已被广泛应用于航空发动机中。根据整体叶盘的切削加工特征，将其简化为整体叶盘基准件，从数控编程和加工技术两方面实现整体叶盘的高质量加工。首先，利用HyperMILL 软件对整体叶盘基准件进行数控编程，优化获得理想的刀具路径，保证高效高质量的零件加工。然后，利用DMU-70V 五轴加工中心对钛合金TC4 整体叶盘基准件进行切削加工，在整体叶盘基准件叶片和流道几何特征的精加工时，选用不同型号的立铣刀，并监测加工过程中的切削力。最后，对加工后叶片和流道加工表面形貌进行测试分析，并结合切削力对比分析国产刀具和进口刀具对钛合金整体叶盘的切削加工性能。

Abstract

Turbine blisk has been widely applied in aero-engine due to its many advantages such as good structural integrity

light weight

less assembling link and high assembling precision. Based on the machining characteristics of the turbine blisk

it is simplified as a benchmark workpiece which can be investigated from two aspects of CNC programming and cutting operation. Firstly

CNC programming of the benchmark workpiece was conducted with HyperMILL software. The ideal tool path were obtained

which can be ensured high efficient and high quality machining of the workpiece. Then

the benchmark workpiece material used TC4 titanium alloy which was milled with DMU-70V five-axis machining center. During the finishing of the blades and the hub surfaces

the cutting forces were on-line measured for different end millingtools. Finally

the surface morphology of the blades and hub machined surfaces were observed. The machining performance of the different milling tools for the benchmark workpiece of TC4 titanium alloy is evaluated with the measured cutting forces and surface morphology.

关键词

Keywords

references

Views

598

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental Study on Milling Performance of Al–60% Si Alloy Based on Minimum Quantity Lubrication

Online Identification Method for Milling Force Coefficients Considering Cutter Orientation

Research Progress on Vibration Hole Making Technology of Carbon Fiber Composite/Titanium Alloy Laminated Structure

Study on Surface Morphology of Nickel-Based Superalloy GH4169 by End-Milling

Research on MQL Parameter Optimization and Cutting Performance in Milling Titanium Alloy

Related Author

SHEN Weizhi

NIU Qiulin

JING Lu

LIU Lipeng

WANG Xinghua

DAI Fupeng

DUAN Xianyin

ZHANG Zezhou

Related Institution

School of Mechanical Engineering, Hunan University of Science and Technology

School of Mechanical and Electrical Engineering, Wuhan University of Engineering

School of Mechanical Engineering, Wuhan University of Science and Technology

Beihang University

Dalian University of Technology

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34726 Visits Today：204

⁰