Research on Grinding and Polishing Performance of Titanium Alloy Fan Blade

LIU Xuan; ZHAO Zhengcai; FU Yucan; XU Jiuhua

doi:10.16080/j.issn1671-833x.2017.17.084

您当前的位置：

首页 >

文章列表页 >

Research on Grinding and Polishing Performance of Titanium Alloy Fan Blade

更新时间：2025-10-30

- Research on Grinding and Polishing Performance of Titanium Alloy Fan Blade
- Aeronautical Manufacturing Technology Vol. 60, Issue 17, Pages: 84-90(2017)
- 作者机构：
  
  1. 南京航空航天大学机电学院,南京,210016
  2. 中国航空制造技术研究院,北京,100024
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2017.17.084
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
刘轩1，赵正彩1，傅玉灿1，徐九华1，李志强2. 钛合金风扇叶片磨抛加工性能试验研究*[J]. 航空制造技术, 2017, 60(17): 84-90.

LIU Xuan1, ZHAO Zhengcai1, FU Yucan1, XU Jiuhua1, LI Zhiqiang2. Research on Grinding and Polishing Performance of Titanium Alloy Fan Blade. Aeronautical Manufacturing Technology, 2017, 60(17): 84-90.
刘轩1，赵正彩1，傅玉灿1，徐九华1，李志强2. 钛合金风扇叶片磨抛加工性能试验研究*[J]. 航空制造技术, 2017, 60(17): 84-90. DOI： 10.16080/j.issn1671-833x.2017.17.084.

LIU Xuan1, ZHAO Zhengcai1, FU Yucan1, XU Jiuhua1, LI Zhiqiang2. Research on Grinding and Polishing Performance of Titanium Alloy Fan Blade. Aeronautical Manufacturing Technology, 2017, 60(17): 84-90. DOI： 10.16080/j.issn1671-833x.2017.17.084.

摘要

针对钛合金风扇叶片磨抛加工中砂轮易磨损、工件表面易烧伤的问题，开展了钛合金材料磨抛加工性试验研究，主要考察砂轮选型、磨抛工艺参数等关键因素对钛合金材料磨抛加工性的影响，并对试验结果进行了分析研究。试验结果表明，在保证工件表面加工质量（R a0.8μm，表面无烧伤）的前提下，普通磨料砂轮GC46L10V 磨抛加工钛合金的材料去除率和磨抛比分别可达5000mm3/min 和2.5，超硬磨料陶瓷结合剂CBN 砂轮磨抛加工钛合金的材料去除率和磨抛比分别可达2000mm3/min 和4。基于研究结果，针对钛合金风扇叶片开展了砂带磨抛加工验证试验，工件加工质量良好。

Abstract

For the grinding wheel wear and burn of workpiece when grinding and polishing titanium alloy fan blade

the grinding and polishing performance of titanium alloy was studied

including the style of grinding wheel and the process parameters. The study shows that the wheel GC46L10V performs well with the material removal rate of 5000mm3/min and the grinding ratio of 2.5 to promise the quality of workpiece. And the CBN grinding wheel also has good performance with the material removal rate of 2000mm3/min and the grinding ratio of 4. To prove results of the study

the experiment of abrasive belt grinding titanium alloy fan blade is conducted and achieves high quality of workpiece.

关键词

Keywords

references

Views

291

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research Progress in Defect and Microstructure of As-Built Selective Laser Melting Ti–6Al–4V Titanium Alloy

Research on RSM-Based Process Parameter Optimization of Titanium Alloy Surface Polishing

Experimental Study on Torsional Ultrasonic Vibration-Assisted Milling of Titanium Alloys

Grain Evolution Simulation and Preparation of TC4 Gradient Structures Fabricated by Laser Deposition Manufacturing

Friction and Influence in FEM Simulation of Local Loading Process for Titanium Alloy Rib-Web Component

Related Author

LI Chen

MI Guangbao

FENG Aihan

HUANG Xu

QU Shoujiang

DU Huapeng

CHEN Jie

GUO Dongliang

Related Institution

School of Materials Science and Engineering, Tongji University

Aviation Key Laboratory of Science and Technology on Advanced Titanium Alloys, AECC Beijing Institute of Aeronautical Materials

Tianjin Long March Launch Vehicle Manufacturing Co. Ltd.

Mechanical Engineering Department, North China Institute of Aerospace Engineering

Henan Polytechnic University

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34721 Visits Today：199

⁰