Effect of Femtosecond Laser Fluence on Recast Layer and Machining Time in Nickel-Based Superalloy

ZHANG Wei; ZHANG Xiaobing; CAI Min; JI Liang

doi:10.16080/j.issn1671-833x.2017.18.062

您当前的位置：

首页 >

文章列表页 >

Effect of Femtosecond Laser Fluence on Recast Layer and Machining Time in Nickel-Based Superalloy

更新时间：2025-10-30

- Effect of Femtosecond Laser Fluence on Recast Layer and Machining Time in Nickel-Based Superalloy
- Aeronautical Manufacturing Technology Vol. 60, Issue 18, Pages: 62-65(2017)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2017.18.062
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
张　伟，张晓兵，蔡　敏，纪　亮. 飞秒激光能量密度对镍基合金重铸层和加工效率的影响[J]. 航空制造技术, 2017, 60(18): 62-65.

ZHANG Wei, ZHANG Xiaobing, CAI Min, JI Liang. Effect of Femtosecond Laser Fluence on Recast Layer and Machining Time in Nickel-Based Superalloy. Aeronautical Manufacturing Technology, 2017, 60(18): 62-65.
张　伟，张晓兵，蔡　敏，纪　亮. 飞秒激光能量密度对镍基合金重铸层和加工效率的影响[J]. 航空制造技术, 2017, 60(18): 62-65. DOI： 10.16080/j.issn1671-833x.2017.18.062.

ZHANG Wei, ZHANG Xiaobing, CAI Min, JI Liang. Effect of Femtosecond Laser Fluence on Recast Layer and Machining Time in Nickel-Based Superalloy. Aeronautical Manufacturing Technology, 2017, 60(18): 62-65. DOI： 10.16080/j.issn1671-833x.2017.18.062.

摘要

以航空发动机叶片制孔为导向，结合飞秒激光对单晶镍基高温合金材料的非热熔性损伤阈值（Φth1）和热熔性损伤阈值（Φth2）特征，研究了飞秒激光能量密度（0Φ44.2J/cm2）对制孔重铸层和加工效率的影响规律。研究结果表明：在Φth1ΦΦth2 时，镍基合金经飞秒激光加工后加工侧壁没有出现明显的重铸物；在ΦΦth2 时，加工侧壁开始出现重铸物，并随着能量密度的增加，重铸层厚度增大。在试验结果的基础上，建立了飞秒激光单脉冲加工深度与能量密度的定量关系。能量密度越高，飞秒激光单脉冲加工深度越大，加工效率越高。

Abstract

The effect of femtosecond laser fluence (0Ф44.2J/cm2) on recast layer and machining eff iciency were investigated with the no-melting ablation threshold (Φth1) and melting ablation threshold (Φth2) in a single-crystal nickelbased superalloy. For the laser fluence range (Φth1ΦΦth2)

there are no indications of conventional laser-induced recast layers in laser-machined area of nickel-base superalloy. For the laser fluence ΦΦth2

recast layers appeared gradually and increased with increasing laser fluence. The relationship between ablation depth for single pulse and laser fluence is established. The larger ablation rate is associated with higher laser fluence.

关键词

Keywords

references

Views

549

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Simulation and Experimental Study on Preparation of Air Film Holes for Aero-Engine Turbine Blades

Research on Selective Processing of RB-SiC Multi-phase Structure by Femtosecond Laser

Experimental Study on Laser Assisted Cluster Magnetorheological Polishing of Sapphire Substrate

Process of Turbine Blade Film Cooling Holes by Nanosecond and Femtosecond Laser Pulses

Experimental Research on Femtosecond Laser Polishing of GH4099 Honeycomb Core

Related Author

WEI Qun

ZENG Xiancheng

XIAO Qiang

ZHANG Manxiao

WANG Wenbo

CHEN Hailing

ZHANG Wenwu

CHEN Xiaoxiao

Related Institution

Xi’an Technological University

中国科学院宁波材料技术与工程研究所

中国科学院大学宁波材料工程学院

全省难加工材料激光极端制造重点实验室

Guangdong University of Technology

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34721 Visits Today：199

⁰