Contrastive Analysis on Quality of Compression Riveting and Hammer Riveting of Slant Composites

LI Hui; YI Chengjun; WANG Qian; LI Jing; GAO Yan; LI Zhenyu

doi:10.16080/j.issn1671-833x.2017.18.097

您当前的位置：

首页 >

文章列表页 >

Contrastive Analysis on Quality of Compression Riveting and Hammer Riveting of Slant Composites

更新时间：2025-10-30

- Contrastive Analysis on Quality of Compression Riveting and Hammer Riveting of Slant Composites
- Aeronautical Manufacturing Technology Vol. 60, Issue 18, Pages: 97-99(2017)
- 作者机构：
  
  1. 航空工业成都飞机工业（集团）有限责任公司复合材料加工厂,成都,610092
  2. 沈阳航空航天大学航空制造工艺国防重点学科实验室,沈阳,113016
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2017.18.097
  CLC：
- Published：2017
- 稿件说明：
移动端阅览
李　辉1，易成君1，王　倩1，李　静2，高　岩2，李振宇2. 复合材料斜面压铆和锤铆铆接质量对比分析[J]. 航空制造技术, 2017, 60(18): 97-99.

LI Hui1, YI Chengjun1, WANG Qian1, LI Jing2, GAO Yan2, LI Zhenyu2. Contrastive Analysis on Quality of Compression Riveting and Hammer Riveting of Slant Composites. Aeronautical Manufacturing Technology, 2017, 60(18): 97-99.
李　辉1，易成君1，王　倩1，李　静2，高　岩2，李振宇2. 复合材料斜面压铆和锤铆铆接质量对比分析[J]. 航空制造技术, 2017, 60(18): 97-99. DOI： 10.16080/j.issn1671-833x.2017.18.097.

LI Hui1, YI Chengjun1, WANG Qian1, LI Jing2, GAO Yan2, LI Zhenyu2. Contrastive Analysis on Quality of Compression Riveting and Hammer Riveting of Slant Composites. Aeronautical Manufacturing Technology, 2017, 60(18): 97-99. DOI： 10.16080/j.issn1671-833x.2017.18.097.

摘要

通过试验对复合材料斜面机器压铆和手工锤铆两种铆接方法的质量进行评估。评估内容主要包括铆钉的外观质量、复材铆接件的外观质量、无损检测和力学性能测试4 个部分。结果表明：压铆的铆钉比复材铆接件的外观质量更好，受人为因素影响小；在无损检测后，压铆后的复材铆接件没有出现分层现象；在力学性能测试部分，压铆的铆接强度优于锤铆的铆接强度。可见在复合材料铆钉中压铆更具有实用性和适用性。

Abstract

The quality of two riveting methods of pressure riveting machine and manual riveting was evaluated by experiment. The main contents of the evaluation include the appearance quality of the rivets

the appearance quality of the composite rivets

the non destructive testing and the mechanical performance test. The results showed that the riveted rivet is better than the appearance of the composite rivets and is less influenced by human factors. After the non destructive testing

there is no delamination phenomenon in riveted riveted joints. In the mechanical performance test section

the compression riveting strength is better than the hammer riveting strength. It can be seen that press riveting is more practical and applicable.

关键词

Keywords

references

Views

584

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design and Verification of the Hot-Press Scheme for Composite Double-Curved Omega Stringer

Deformation Prediction of Composite Bolted Joints Considering Multi-Source Variables

Experimental Study on Penetration Characteristics of Domestic Automated Placement Dry Fibers

Research Progress on Structure Design and Properties of MXene-Based Electromagnetic Shielding Composites

Research on Spreading Carbon Fiber Composites: Microscopic Morphology and Mechanical Property Changes

Related Author

LIU Juntian

YAN Chao

QIU Chunliang

CHEN Ping

LU Xin

YU Wencai

LIU Yuming

LIN Qingyuan

Related Institution

Changzhou Newtry Aviation Technology Co., Ltd.

COMAC Shanghai Aircraft Manufacturing Co., Ltd.

Shanghai Key Laboratory of Digital Manufacture for Thin-Walled Structures, Shanghai Jiao Tong University

Composite Center, COMAC Shanghai Aircraft Manufacturing Co. Ltd.

Center for Civil Aviation Composites, Donghua University

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34721 Visits Today：199

⁰