Research on Onsite Real Time Data Driven 3D Visualization Monitoring of Aircraft Wing-Body Drilling Process

WANG Junfeng; LIU Rui; XIE Min; GUO Hongjie; XU Shilei; ZHANG Shusheng; LI Shiqi

doi:10.16080/j.issn1671-833x.2018.01/02.036

您当前的位置：

首页 >

文章列表页 >

Research on Onsite Real Time Data Driven 3D Visualization Monitoring of Aircraft Wing-Body Drilling Process

更新时间：2025-10-30

- Research on Onsite Real Time Data Driven 3D Visualization Monitoring of Aircraft Wing-Body Drilling Process
- Aeronautical Manufacturing Technology Vol. 61, Issue 1/2, (2018)
- 作者机构：
  
  1. 华中科技大学机械科学与工程学院,武汉,430074
  2. 航空工业成都飞机工业（集团）有限责任公司,成都,610073
  3. 航空工业沈阳飞机工业（集团）有限公司,沈阳,110034
  4. 中国航空制造技术研究院,北京,100024
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2018.01/02.036
  CLC：
- Published：2018
- 稿件说明：
移动端阅览
王峻峰，刘锐，谢敏，郭洪杰，徐石磊，张书生，李世其. 现场实时数据驱动的翼身制孔过程三维可视化监视研究[J]. 航空制造技术, 2018, 61(1/2): 36-41. WANG Junfeng, LIU Rui, XIE Min, GUO Hongjie, XU Shilei, ZHANG Shusheng, LI Shiqi. Research on Onsite Real Time Data Driven 3D Visualization Monitoring of Aircraft Wing-Body Drilling Process[J]. Aeronautical Manufacturing Technology, 2018, 61(1/2): 36-41.

WANG Junfeng, LIU Rui, XIE Min, et al. Research on Onsite Real Time Data Driven 3D Visualization Monitoring of Aircraft Wing-Body Drilling Process[J]. Aeronautical Manufacturing Technology, 2018, 61(1/2).
王峻峰，刘锐，谢敏，郭洪杰，徐石磊，张书生，李世其. 现场实时数据驱动的翼身制孔过程三维可视化监视研究[J]. 航空制造技术, 2018, 61(1/2): 36-41. WANG Junfeng, LIU Rui, XIE Min, GUO Hongjie, XU Shilei, ZHANG Shusheng, LI Shiqi. Research on Onsite Real Time Data Driven 3D Visualization Monitoring of Aircraft Wing-Body Drilling Process[J]. Aeronautical Manufacturing Technology, 2018, 61(1/2): 36-41. DOI： 10.16080/j.issn1671-833x.2018.01/02.036.

WANG Junfeng, LIU Rui, XIE Min, et al. Research on Onsite Real Time Data Driven 3D Visualization Monitoring of Aircraft Wing-Body Drilling Process[J]. Aeronautical Manufacturing Technology, 2018, 61(1/2). DOI： 10.16080/j.issn1671-833x.2018.01/02.036.

摘要

针对飞机大部件数字化柔性装配过程，面向制孔现场局部区域开敞性差、人工观察视角受限、制孔过程信息可视化程度不高等问题，提出了一种现场数据驱动的翼身制孔过程三维实时可视化监视方案。提出了面向现场可视化监视的制孔系统数据集，描述了虚实制孔场景的数据集成流程，根据实际需求给出了三维视角管理和孔位特征实时可视化生成的实现方法。基于CATIA 平台开发实现了制孔过程三维可视化现场监视原型系统，该系统通过建立与现场设备服务器的连接，实时获取制孔过程数据，能够直观、动态、多维地展现实际制孔过程，提高对飞机大部件制孔过程的现场监视能力。

Abstract

Aiming at flexible digital assembly process of aircraft large components

a 3D visual monitoring method of drilling process for aircraft wings is proposed based on real time onsite data in order to relieve the problems such as poorly openness of component local area

limited observation view of operators

lower level visualization of drilling process information. A data set of drilling system for onsite monitoring visualization is presented. A process for data integration between virtual and physical drilling scenario is described. Multiple 3D view management of virtual scenario and real time visualization of drilling hole feature are elaborated according to the actual requirements. A prototyping system for 3D visualization onsite monitoring of drilling process is developed based on the CAITA platform. By establishing network connection with onsite equipment servers

the system can real-time receive and display multi-dimensional information of drilling process intuitively and dynamically

which improves the onsite monitoring capability of aircraft large components drilling process.

关键词

Keywords

references

Views

370

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Exploration and Practice of Overall Design Mode of Aircraft Mobile Assembly Line

Research on Burr Free Automatic Drilling and Interference Fit Riveting Process for Aircraft Seam Seal Assembly

Optimization Method for Layout of Temporary Fasteners of Aircraft Composite Structure Assembly Pre-Joining

Measurement Stability Analysis and Control Method of Aircraft Assembly Tooling

Rapid Design of Welding Tooling for Aviation Conduit

Related Author

YANG Wen

GENG Junhao

WANG Hongfeng

WAN Lei

LUO Zhiguang

YANG Ping

ZHOU Hang

WU Yuetao

Related Institution

AVIC XAC Commercial Aircraft Co., Ltd.

College of Mechanical Engineering, Northwestern Polytechnical University

AVIC Shenyang Aircraft Industry (Group) Co., Ltd.

Nanjing University of Aeronautics and Astronautics

Innovation Center of Jiangsu Province for Advanced Composite Technology and Equipment

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34634 Visits Today：112

⁰