Research of Communication Protocol for IoT-Based Manufacturing Workshops

ZHANG Quwei; TANG Dunbing; ZHANG Tao; ZHENG Du; WANG Yingcong

doi:10.16080/j.issn1671-833x.2018.01/02.068

您当前的位置：

首页 >

文章列表页 >

Research of Communication Protocol for IoT-Based Manufacturing Workshops

更新时间：2025-10-30

- Research of Communication Protocol for IoT-Based Manufacturing Workshops
- Aeronautical Manufacturing Technology Vol. 61, Issue 1/2, (2018)
- 作者机构：
  
  南京航空航天大学机电学院,南京,210016
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2018.01/02.068
  CLC：
- Published：2018
- 稿件说明：
移动端阅览
张区委，唐敦兵，张涛，郑杜，王盈聪. 面向物联制造车间通信协议研究[J]. 航空制造技术, 2018, 61(1/2): 68-74. ZHANG Quwei, TANG Dunbing, ZHANG Tao, ZHENG Du, WANG Yingcong. Research of Communication Protocol for IoT-Based Manufacturing Workshops[J]. Aeronautical Manufacturing Technology, 2018, 61(1/2): 68-74.

ZHANG Quwei, TANG Dunbing, ZHANG Tao, et al. Research of Communication Protocol for IoT-Based Manufacturing Workshops[J]. Aeronautical Manufacturing Technology, 2018, 61(1/2).
张区委，唐敦兵，张涛，郑杜，王盈聪. 面向物联制造车间通信协议研究[J]. 航空制造技术, 2018, 61(1/2): 68-74. ZHANG Quwei, TANG Dunbing, ZHANG Tao, ZHENG Du, WANG Yingcong. Research of Communication Protocol for IoT-Based Manufacturing Workshops[J]. Aeronautical Manufacturing Technology, 2018, 61(1/2): 68-74. DOI： 10.16080/j.issn1671-833x.2018.01/02.068.

ZHANG Quwei, TANG Dunbing, ZHANG Tao, et al. Research of Communication Protocol for IoT-Based Manufacturing Workshops[J]. Aeronautical Manufacturing Technology, 2018, 61(1/2). DOI： 10.16080/j.issn1671-833x.2018.01/02.068.

摘要

现场总线和工业以太网在车间层网络应用的特点分析表明，工业以太网在车间底层网络的应用是必然趋势。现有工业以太网通信协议在物联制造车间应用过程中，存在通信过程数据量过大而导致信息实时性难以满足要求的问题。针对物联制造的特点，开发了基于TCP/IP 的面向物联制造车间的通信协议，用以实现物联制造车间各信息层之间的实时通信。案例分析表明，此协议简化了传统通信协议的复杂性，可明显减少通信过程中的数据量，提高车间通信的效率，满足物联制造的实时通信要求。

Abstract

This paper analyzes the characteristics of fieldbus and industrial Ethernet in the shop floor network

and draws the conclusion that the application of industrial Ethernet in the shop floor network is inevitable. Based on the analysis of the existing industrial Ethernet communication protocols

the amount of data is too large in the communication process. This problem causes that the real-time of information is difficult to be met. The protocol which is based on TCP/IP is developed for characteristics of the IoT-based manufacturing and used to achieve real-time communication among information layers in IoT-based manufacturing workshops. The case analysis indicates that this protocol simplifies complexity of traditional communication protocols

reduces the amount of data obviously in the communication process

improves efficiency of the communication and satisfies the real-time communication requirements in IoT-based manufacturing.

关键词

Keywords

references

Views

448

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research Progress on Ceramic Matrix Composites for Aviation Applications

Assessment of Technological Advancement Based on Fuzzy Comprehensive Evaluation

Dynamic Measurement Method for Shaft Deflection Angles in Helicopter Drive Systems

Modulation of Pore Structure and Properties in Phenolic Aerogels by Cationic Polyelectrolytes

Research Progress on In-Plane Shear Mechanical Behavior of Silicon Carbide Ceramic Matrix Composites

Related Author

No data

Related Institution

No data

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34634 Visits Today：112

⁰