Numerical Study on Surface Integrity of Shot-Peened Aluminum

WANG Cheng; ZHOU Zechen; YANG Jichong

doi:10.16080/j.issn1671-833x.2020.12.060

您当前的位置：

首页 >

文章列表页 >

Numerical Study on Surface Integrity of Shot-Peened Aluminum

更新时间：2025-10-30

- Numerical Study on Surface Integrity of Shot-Peened Aluminum
- Aeronautical Manufacturing Technology Vol. 63, Issue 12, Pages: 60-66(2020)
- 作者机构：
  
  安徽理工大学机械工程学院,淮南,232001
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2020.12.060
  CLC：
- Published：2020
- 稿件说明：
移动端阅览
王成，周泽琛，杨继冲. 喷丸强化纯铝表面完整性的数值研究[J]. 航空制造技术, 2020, 63(12): 60-66.

WANG Cheng, ZHOU Zechen, YANG Jichong. Numerical Study on Surface Integrity of Shot-Peened Aluminum. Aeronautical Manufacturing Technology, 2020, 63(12): 60-66.
王成，周泽琛，杨继冲. 喷丸强化纯铝表面完整性的数值研究[J]. 航空制造技术, 2020, 63(12): 60-66. DOI： 10.16080/j.issn1671-833x.2020.12.060.

WANG Cheng, ZHOU Zechen, YANG Jichong. Numerical Study on Surface Integrity of Shot-Peened Aluminum. Aeronautical Manufacturing Technology, 2020, 63(12): 60-66. DOI： 10.16080/j.issn1671-833x.2020.12.060.

摘要

为数值研究喷丸强化纯铝的表面完整性，发展一种新型的喷丸强化有限元模型，模拟多弹丸连续冲击材料表面的过程，弹丸冲击形成的凹坑在受喷表面上呈圆周分布。建立一条圆周路径，计算在该圆周路径上的喷丸覆盖率，通过改变弹丸个数分析在不同喷丸覆盖率下沿受喷表面圆周路径分布的表面形貌、粗糙度、残余应力、加工硬化和晶粒细化。结果表明：随着喷丸覆盖率的增大，受喷表面粗糙度、残余压应力、表面硬化程度和晶粒细化程度都随之增大，但达到完全喷丸覆盖率后，受喷表面粗糙度、残余压应力、表面硬化和晶粒细化增大的幅度逐渐减小，逐渐趋于稳定，该变化趋势与材料表面等效塑性应变的演化相一致。

Abstract

The surface integrity of shot-peened aluminum was numerically studied. A new finite element model of shot peening was developed

in which the indentations produced by multiple shot impacts are distributed uniformly on a circle within the shot-peened surface. The shot peening coverage was calculated by creating a circular path. Under the different shot peening coverage

the circular path-distributed surface morphology

roughness

residual stress

work hardening and grain refinement were investigated. The results show that

with the increase of shot peening coverage

the surface roughness

residual compressive stress

work hardening degree and grain-refinement degree increase

but the increments gradually decrease and present the saturate tendency after exceeding the full coverage

which are in accord with the evolution of surface equivalent plastic strain induced by multiple shot impacts.

关键词

Keywords

references

Views

230

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental Research on Surface Integrity of Shot Peening K417G Superalloy

Effect of Shot Peening on Surface Integrity and Fatigue Life of TC17 Alloy

Effect of Shot Peening Coverage on Residual Stress and Surface Roughness of 9310 Aircraft Gear

Study on Effect of Different Shot Peening Intensities on Surface Integrity of FGH96 Powder Metallurgy Superalloy

Effect of Shot Peening Coverage on Surface Integrity of 2024–T351 Aluminum Alloy

Related Author

MA Fangwei

MIN Xianglu

HAN Wei

LIANG Qiaoyun

YUAN Peiyu

TAN Liang

ZHANG Shaoping

TAN Jun

Related Institution

AECC Shenyang Liming Aero-Engine Co. Ltd.

Key Laboratory of High Performance Manufacturing for Aero Engine, Ministry of Industry and Information Technology, Northwestern Polytechnical University

AECC Sichuan Gas Turbine Research Establishment

AECC Aviation Power Co., Ltd.

Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education,Northwestern Polytechnical University

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34526 Visits Today：4

⁰