Hot Corrosion Behavior of Typical Bond Coats in Thermal Barrier Coatings Systems

YANG Yingfei; REN Pan; BAO Zebin; DENG Chunming; LI Wei

doi:10.16080/j.issn1671-833x.2020.14.034

您当前的位置：

首页 >

文章列表页 >

Hot Corrosion Behavior of Typical Bond Coats in Thermal Barrier Coatings Systems

更新时间：2025-10-30

- Hot Corrosion Behavior of Typical Bond Coats in Thermal Barrier Coatings Systems
- Aeronautical Manufacturing Technology Vol. 63, Issue 14, Pages: 34-40(2020)
- 作者机构：
  
  1. 暨南大学先进耐磨蚀及功能材料研究院,广州,510632
  2. 中国科学院金属研究所,沈阳,110016
  3. 广东省新材料研究所现代材料表面工程技术国家工程实验室,广州,510650
  4. 广东省现代表面工程技术重点实验室,广州,510650
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2020.14.034
  CLC：
- Published：2020
- 稿件说明：
移动端阅览
阳颖飞，任盼，鲍泽斌，邓春明，李卫. 热障涂层体系典型黏结层的抗热腐蚀性能[J]. 航空制造技术, 2020, 63(14): 34-40/47.

YANG Yingfei, REN Pan, BAO Zebin,DENG Chunming, LI Wei. Hot Corrosion Behavior of Typical Bond Coats in Thermal Barrier Coatings Systems. Aeronautical Manufacturing Technology, 2020, 63(14): 34-40/47.
阳颖飞，任盼，鲍泽斌，邓春明，李卫. 热障涂层体系典型黏结层的抗热腐蚀性能[J]. 航空制造技术, 2020, 63(14): 34-40/47. DOI： 10.16080/j.issn1671-833x.2020.14.034.

YANG Yingfei, REN Pan, BAO Zebin,DENG Chunming, LI Wei. Hot Corrosion Behavior of Typical Bond Coats in Thermal Barrier Coatings Systems. Aeronautical Manufacturing Technology, 2020, 63(14): 34-40/47. DOI： 10.16080/j.issn1671-833x.2020.14.034.

摘要

为了探究热障涂层体系中不同类型黏结层的热腐蚀行为，对比评价了 4 种典型黏结层（普通 NiAl 涂层、NiCoCrAlY 涂层、Pt 改性 NiAl 涂层以及 Pt+Hf 改性 NiAl 涂层）在 900℃ 条件下 Na2SO4/NaCl（质量分数 75%∶25%）混合盐中的热腐蚀行为。利用扫描电镜、X 射线衍射以及电子探针等手段分析了热腐蚀过程中的物相结构、显微组织演变规律。研究结果表明，普通 NiAl 涂层退化最快，NiCoCrAlY 涂层的退化速率相对 NiAl 涂层有所减慢，两种改性 NiAl 涂层表现出较好的抗热腐蚀性能，其中 Pt 改性 NiAl 涂层具有最佳的抗热腐蚀能力，相比之下 Hf 元素的加入对 Pt–Al 涂层抗热腐蚀性能无益。

Abstract

In order to investigate the hot corrosion behavior of the commonly-used bond coats for thermal barrier coating system

four typical bond coats (i.e.

plain NiAl coating

NiCoCrAlY coating

Pt modified NiAl coating and Pt+Hf co-modified NiAl coating) were comparably evaluated in the mixed salts of Na2SO4/NaCl (mass fraction 75%∶25%) at 900℃. The phase constitution evolution and microstructure change during hot corrosion were analyzed by scanning electron microscope (SEM)

electron probe micro-analyzer (EPMA) and X–ray diffractometer (XRD). The results showed that plain NiAl coating degrades fastest during hot corrosion test. In contrast

the degradation rate of NiCoCrAlY coating is slower. The hot corrosion resistance of the two modified NiAl coatings is satisfactory

Pt modified NiAl is the best among the four coatings. It seems that the addition of Hf does not benefit the hot corrosion resistance of Pt–Al coating.

关键词

Keywords

references

Views

815

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Review of Titanium Alloy Plate Rolling Technology (Part 1) ——Sheet Forming Technology

Study on Effect of Laser Swing on Microstructure of Additive Manufacturing Titanium Alloy

Research Progress on Detection Technology for Film Cooling Holes and Coating Defects of Turbine Blades

Current Research Status of Doping Modified–NiAl Bond Coat for Thermal Barrier Coating System

Temperature Distribution of Ceramic Top-Coat in Thermal Barrier Coatings Via Delamination Crack Shape and Size

Related Author

LI Jinshan

WANG Jian

TANG Bin

LI Ruifeng

FAN Jiangkun

ZHANG Zhixin

ZHANG Jie

GU Hai

Related Institution

Baoti Group Co., Ltd.

Sanhang Advanced Materials Research Institute Co., Ltd

Chongqing Innovation Center, Northwestern Polytechnical University

Nantong University

Nantong Institute of Technology

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34526 Visits Today：4

⁰