Research on 3D Surface Topography in Milling of CFRP

FAN Wentao; CHEN Yan; CHEN Yijia; XIE Songfeng; JI Junjie; JI Daohang

doi:10.16080/j.issn1671-833x.2021.09.062

您当前的位置：

首页 >

文章列表页 >

Research on 3D Surface Topography in Milling of CFRP

更新时间：2025-10-30

- Research on 3D Surface Topography in Milling of CFRP
- Aeronautical Manufacturing Technology Vol. 64, Issue 9, Pages: 62-67(2021)
- 作者机构：
  
  南京航空航天大学江苏省精密与微细制造技术重点实验室,南京,210016
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2021.09.062
  CLC：
- Published：2021
- 稿件说明：
移动端阅览
范文涛，陈燕，陈逸佳，谢松峰，季珺杰，纪道航. CFRP 铣削加工三维形貌研究[J]. 航空制造技术, 2021, 64(9): 62-67.

FAN Wentao, CHEN Yan, CHEN Yijia, XIE Songfeng, JI Junjie, JI Daohang. Research on 3D Surface Topography in Milling of CFRP. 航空制造技术, 2021, 64(9): 62-67.
范文涛，陈燕，陈逸佳，谢松峰，季珺杰，纪道航. CFRP 铣削加工三维形貌研究[J]. 航空制造技术, 2021, 64(9): 62-67. DOI： 10.16080/j.issn1671-833x.2021.09.062.

FAN Wentao, CHEN Yan, CHEN Yijia, XIE Songfeng, JI Junjie, JI Daohang. Research on 3D Surface Topography in Milling of CFRP. 航空制造技术, 2021, 64(9): 62-67. DOI： 10.16080/j.issn1671-833x.2021.09.062.

摘要

碳纤维增强树脂基复合材料（Carbon fiber reinforced polymer，CFRP）是一种典型的难加工材料，其铣削加工存在表面质量差、表面形貌难以充分表征等问题，为解决该问题，开展了不同进给速度下的槽铣试验，研究了CFRP 铣削表面形貌及其形成机理。结果表明，三维表面粗糙度较二维表面粗糙度能更加全面地反映 CFRP 铣削表面形貌，并选用了算术平均高度 S

、均方根高度 S

、偏斜度 S

以及陡峭度 S

对 CFRP 表面形貌进行联合表征。随着进给速度的增大，三维表征参数中S

、S

逐渐增大，S

和S

逐渐减小。为保证较好的加工表面质量，应选用顺铣的加工方式，且进给速度不大于 1200mm/min。

Abstract

Carbon fiber reinforced polymer (CFRP) is a typical difficult–to–machining material. There are still some problems in its milling process

such as the poor surface quality and difficulty in fully characterizing the surface topography. In this article

slot–milling tests were carried out with different feed speeds

and the surface topography and machining mechanism of CFRP milling was studied. It was found that there was a big deficiency using two–dimensional surface roughness parameters

three–dimensional surface roughness can more comprehensively reflect the surface topography of CFRP milling. The surface topography of CFRP was jointly characterized by arithmetic mean height S

root mean square height S

skewness S

and kurtosis S

. With the increase of the feed speed

and S

increase gradually

but S

and S

decrease. In order to guarantee the machined surface quality

the down milling method is used

and the feed speed should be less than 1200mm/min.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of Relative Mechanical Properties of Abrasives and Ceramics on Surface Morphology of Ceramics During Micro-Abrasive Air-Jet Machining

Ultrasonic Vibration-Assisted Nanosecond Laser Ablation of Ti–6Al–4V Surface Creation Mechanisms

Research on Machine Learning-Based Dynamic Characteristic Recognition Method for Milling System of Curved Thin-Walled Parts

Chatter Suppression of Piezoelectric Intelligent Thin Plate Based on PD–Sliding Mode Coupled Control

Research on Pulsed Laser Cleaning Process of Cessna 172 Engine Casing

Related Author

ZHAO Yugang

SUN Yuli

CUI Huanyong

ZUO Lisheng

ZHANG Guiguan

LIU Mei

TANG Rui

MA Wentian

Related Institution

China International Science and Technology Cooperation Base on Intelligent Equipment Manufacturing in Special Service Environment, Anhui University of Technology, Ma’anshan

Jiangsu Provincial Key Laboratory of Precision and Microfabrication Technology, Nanjing University of Aeronautics and Astronautics

Shandong Provincial Key Laboratory of High Performance Precision Manufacturing and Composite Machining Technology, Shandong University of Technology

School of Mechanical Engineering, Shandong University of Technology

Tianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry & Food Machinery and Equipment

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34501 Visits Today：448

⁰