Research and Application Progress of Key Technologies for Composites Cryogenic Tanks

WU Zhanjun; CHEN Duo; LI Shichao; CUI Yunguang; LI Juanzi; YUAN Yuhuan; WANG Hongyu; LIU Xin

doi:10.16080/j.issn1671-833x.2021.11.014

您当前的位置：

首页 >

文章列表页 >

Research and Application Progress of Key Technologies for Composites Cryogenic Tanks

更新时间：2025-10-30

- Research and Application Progress of Key Technologies for Composites Cryogenic Tanks
- Aeronautical Manufacturing Technology Vol. 64, Issue 11, Pages: 14-23(2021)
- 作者机构：
  
  1. 大连理工大学航空航天学院,大连,116024
  2. 大连理工大学材料科学与工程学院,大连,116024
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2021.11.014
  CLC：
- Published：2021
- 稿件说明：
移动端阅览
武湛君，陈铎，李世超，崔运广，李娟子，袁玉环，王宏宇，刘新. 低温复合材料贮箱关键技术研究应用进展[J]. 航空制造技术, 2021, 64(11): 14-23.

WU Zhanjun,CHEN Duo,LI Shichao,CUI Yunguang,LI Juanzi,YUAN Yuhuan2, WANG Hongyu,LIU Xin. Research and Application Progress of Key Technologies for Composites Cryogenic Tanks. Aeronautical Manufacturing Technology, 2021, 64(11): 14-23.
武湛君，陈铎，李世超，崔运广，李娟子，袁玉环，王宏宇，刘新. 低温复合材料贮箱关键技术研究应用进展[J]. 航空制造技术, 2021, 64(11): 14-23. DOI： 10.16080/j.issn1671-833x.2021.11.014.

WU Zhanjun,CHEN Duo,LI Shichao,CUI Yunguang,LI Juanzi,YUAN Yuhuan2, WANG Hongyu,LIU Xin. Research and Application Progress of Key Technologies for Composites Cryogenic Tanks. Aeronautical Manufacturing Technology, 2021, 64(11): 14-23. DOI： 10.16080/j.issn1671-833x.2021.11.014.

摘要

利用聚合物基复合材料替代金属材料制造运载火箭低温推进剂贮箱可以显著提高运载火箭的运载能力，并降低发射成本。应用于贮箱的聚合物基复合材料除了满足超低温力学性能要求外，还需满足抗低温介质渗漏和液氧相容性的要求。针对聚合物基复合材料应用于低温贮箱存在的科学问题，对耐低温聚合物和先进复合材料成型工艺等关键技术在低温复合材料贮箱制造中研究应用等方面展开综述，并对复合材料贮箱未来研究方向和发展前景进行展望。

Abstract

Using polymer matrix composites to make cryogenic propellant tank of launch vehicle can significantly improve the launch capability of launch vehicle and reduce the launch cost. Not only must polymer matrix composites used in these applications be very structurally efficient

they must also contain extremely volatile cryogenic propellants. These requirements put forward high requirements for materials selection

tank structure design and manufacturing process. In this paper

the current research status of polymer for cryogenic use and the application of advanced composites manufacturing technology in composites cryogenic tank are summarized. Moreover

future research direction has been proposed to promote the practical engineering application of composites cryogenic tanks.

关键词

Keywords

references

Views

157

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Fault Diagnosis Method for Gyro in Double-Redundant Strapdown Control System

Design and Experimental Verification of Stitching Forming System for Rigid Sandwich Composite Preforms

Modulation of Pore Structure and Properties in Phenolic Aerogels by Cationic Polyelectrolytes

Dynamic Measurement Method for Shaft Deflection Angles in Helicopter Drive Systems

Research Progress on In-Plane Shear Mechanical Behavior of Silicon Carbide Ceramic Matrix Composites

Related Author

王晨

李新国

Related Institution

西北工业大学航天学院

⁰