Energy Collection of Cutting Vibration Based on Piezoelectric Effect and Application of Damping Tools

YANG Yiqing; SHEN Rui; GAO Haoyang; HE Wanlin; ZHAO Hongjie

doi:10.16080/j.issn1671-833x.2021.14.066

您当前的位置：

首页 >

文章列表页 >

Energy Collection of Cutting Vibration Based on Piezoelectric Effect and Application of Damping Tools

更新时间：2025-10-30

- Energy Collection of Cutting Vibration Based on Piezoelectric Effect and Application of Damping Tools
- Aeronautical Manufacturing Technology Vol. 64, Issue 14, Pages: 66-70(2021)
- 作者机构：
  
  1. 北京航空航天大学,北京,100191
  2. 首都航天机械有限公司,北京,100076
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2021.14.066
  CLC：
- Published：2021
- 稿件说明：
移动端阅览
杨毅青，申睿，高浩洋，何万林，赵洪杰. 基于压电效应的切削振动能量收集及减振刀具应用[J]. 航空制造技术, 2021, 64(14): 66-70/100.

YANG Yiqing,SHEN Rui,GAO Haoyang,HE Wanlin,ZHAO Hongjie. Energy Collection of Cutting Vibration Based on Piezoelectric Effect and Application of Damping Tools. Aeronautical Manufacturing Technology, 2021, 64(14): 66-70/100.
杨毅青，申睿，高浩洋，何万林，赵洪杰. 基于压电效应的切削振动能量收集及减振刀具应用[J]. 航空制造技术, 2021, 64(14): 66-70/100. DOI： 10.16080/j.issn1671-833x.2021.14.066.

YANG Yiqing,SHEN Rui,GAO Haoyang,HE Wanlin,ZHAO Hongjie. Energy Collection of Cutting Vibration Based on Piezoelectric Effect and Application of Damping Tools. Aeronautical Manufacturing Technology, 2021, 64(14): 66-70/100. DOI： 10.16080/j.issn1671-833x.2021.14.066.

摘要

大长径比刀具普遍应用于具有深腔、深孔特征工件的加工。随着悬长的增加，刀具等效刚度降低，易引发强烈切削振动。设计内置压电陶瓷吸振器的大长径比车刀，可将主结构振动转化为吸振器质量块振动和压电陶瓷输出的电能，提升减振效果。模态试验表明，减振车刀共振峰值相比于原刀具减少了 80.1%。最后，开展多组切削试验，相比于无吸振器刀具，加吸振器后刀具频响函数峰值下降了 72%，工件表面粗糙度下降了 67.2%。同时，收集到的输出电压达 1.1~10.1V，该信号与切削振动密切相关。

Abstract

The tool with large aspect ratio is widely used in machining workpieces with deep cavity and deep hole characteristics. With the increase of the suspension length

the equivalent stiffness of the tool decreases

which leads to strong cutting vibration. The design of large aspect ratio turning tool with built-in piezoelectric ceramic damper can transform the vibration of main structure into the vibration of damper mass and the electric energy output of piezoelectric ceramic

so as to improve the vibration reduction effect. The modal experiment shows that the resonance peak value of the damped tool is reduced by 80.1% compared with the original tool. Finally

several cutting experiments were carried out. After adding damper

the peak value of tool’s FRF decreased by 72%

and the surface roughness of the workpiece decreased by 67.2%. At the same time

the output voltage signal collected is 1.1–10.1V

which was closely related to the cutting vibration.

关键词

Keywords

references

Views

326

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research Status and Development Trends of Aircraft De-Icing Technology Based on Piezoelectric Ceramics and Their Composites

Research Progress on 3D Printing of Piezoelectric Ceramics

Study on Anti-Loosening Performance of Diﬀerent Gasket Structures Based on Vibration

Analysis and Elimination of High-Pressure Rotor Balancing Process Problems

Research Progress on Mechanism and Application of Vibration Assisted Plastic Forming

Related Author

ZHANG Haibo

LUO Jianghai

XU Zhiqiang

ZHOU Xinyi

MA Weigang

WANG Chuanmin

TAN Hua

JIANG Shenglin

Related Institution

School of Optics and Electronic Information, Huazhong University of Science and Technology

AVIC Wuhan Aviation Instrument Co., Ltd.

Guangdong HUST Industrial Technology Research Institute

State Key Laboratory of Material Processing and Die & Mould Technology, Huazhong University of Science and Technology

Shandong Engineering Research Center for Additive Manufacturing, Qingdao University of Technology

⁰