Process of Turbine Blade Film Cooling Holes by Nanosecond and Femtosecond Laser Pulses

JIANG Qilin; CAO Kaiqiang; CHEN Long; FENG Chaopeng; JIA Tianqing; SUN Zhenrong

doi:10.16080/j.issn1671-833x.2021.18.053

您当前的位置：

首页 >

文章列表页 >

Process of Turbine Blade Film Cooling Holes by Nanosecond and Femtosecond Laser Pulses

更新时间：2025-10-30

- Process of Turbine Blade Film Cooling Holes by Nanosecond and Femtosecond Laser Pulses
- Aeronautical Manufacturing Technology Vol. 64, Issue 18, Pages: 53-61(2021)
- 作者机构：
  
  华东师范大学精密光谱科学与技术国家重点实验室,上海,200241
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2021.18.053
  CLC：
- Published：2021
- 稿件说明：
移动端阅览
蒋其麟，曹凯强，陈龙，冯朝鹏，贾天卿，孙真荣. 涡轮叶片气膜孔的纳秒 -飞秒双波段激光加工[J]. 航空制造技术, 2021, 64(18): 53-61.

JIANG Qilin, CAO Kaiqiang, CHEN Long, FENG Chaopeng, JIA Tianqing, SUN Zhenrong. Process of Turbine Blade Film Cooling Holes by Nanosecond and Femtosecond Laser Pulses. 航空制造技术, 2021, 64(18): 53-61.
蒋其麟，曹凯强，陈龙，冯朝鹏，贾天卿，孙真荣. 涡轮叶片气膜孔的纳秒 -飞秒双波段激光加工[J]. 航空制造技术, 2021, 64(18): 53-61. DOI： 10.16080/j.issn1671-833x.2021.18.053.

JIANG Qilin, CAO Kaiqiang, CHEN Long, FENG Chaopeng, JIA Tianqing, SUN Zhenrong. Process of Turbine Blade Film Cooling Holes by Nanosecond and Femtosecond Laser Pulses. 航空制造技术, 2021, 64(18): 53-61. DOI： 10.16080/j.issn1671-833x.2021.18.053.

摘要

针对航空发动机中涡轮叶片气膜孔的复杂加工要求，提出并建立了一套基于纳秒 – 飞秒双波段激光加工的方法与系统。使用三维扫描仪对涡轮叶片气膜孔进行空间坐标获取，对气膜孔的实际加工坐标进行了误差校正，实现了气膜孔的高精度定位。综合利用 532nm 纳秒激光高效率与 400nm 飞秒激光高精度的特点，在不锈钢涡轮叶片上实现了 81 个气膜孔的高精度、高质量加工。孔径一致性达到 ±10μm，定位精度小于 50μm。工业计算机层析成像检测以及高倍显微镜检测的结果表明，气膜孔孔形良好，内壁无交叉、孔壁光滑、无明显重熔层与微裂纹。

Abstract

To meet the demand of strict process of turbine blade film cooling holes in aero-engine

a method was proposed and a system was set up based on nanosecond laser and femtosecond laser pulses. A 3D scanner was used to compensate errors of coordinates accurately in process of film cooling holes. Combining high-efficiency feature of 532nm nanosecond laser with high-precision feature of 400nm femtosecond laser

eighty-one film cooling holes were processed in each of stainless-steel turbine blades. Deviations of the diameter are kept within 10μm and the position errors are no more than 50μm. Profiles of film cooling holes are in good condition and no resolidified layer or microcracks are found under the detection of industrial computer tomography and high magnification microscope. High-quality film cooling holes are processed with no interference.

关键词

Keywords

references

Views

110

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on Selective Processing of RB-SiC Multi-phase Structure by Femtosecond Laser

Simulation and Experimental Study on Preparation of Air Film Holes for Aero-Engine Turbine Blades

Ultrasonic Vibration-Assisted Nanosecond Laser Ablation of Ti–6Al–4V Surface Creation Mechanisms

Eddy Current Testing and Damage Analysis of Single Crystal Turbine Blade With Thermal Barrier Coatings

Application of Turbine Blade Registration Algorithm Based on Measurement Point Cloud

Related Author

ZHANG Manxiao

WANG Wenbo

CHEN Hailing

ZHANG Wenwu

CHEN Xiaoxiao

YANG Kun

WEI Qun

ZENG Xiancheng

Related Institution

全省难加工材料激光极端制造重点实验室

中国科学院大学宁波材料工程学院

中国科学院宁波材料技术与工程研究所

Xi’an Technological University

Tianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry & Food Machinery and Equipment

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34517 Visits Today：464

⁰