Research Advances in Hole Making Technology of Carbon Fiber Reinforced Plastics/Light Alloy Laminated Structure

doi:10.16080/j.issn1671-833x.2022.09.082

您当前的位置：

首页 >

文章列表页 >

Research Advances in Hole Making Technology of Carbon Fiber Reinforced Plastics/Light Alloy Laminated Structure

更新时间：2025-07-30

- Research Advances in Hole Making Technology of Carbon Fiber Reinforced Plastics/Light Alloy Laminated Structure
- Aeronautical Manufacturing Technology Vol. 65, Issue 9, (2022)
- 作者机构：
  
  1. 航空工业成都飞机工业（集团）有限责任公司,成都,610092
  2. 北京航空航天大学,北京,100191
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2022.09.082
  CLC：
- Published：2022
- 稿件说明：
移动端阅览
白大山，陈五一，陈雪梅. 碳纤维增强复合材料/轻合金叠层结构制孔技术研究进展[J]. 航空制造技术, 2022, 65(9): 82-88.

BAI Dashan，CHEN Wuyi，CHEN Xuemei. Research Advances in Hole Making Technology of Carbon Fiber Reinforced Plastics/Light Alloy Laminated Structure[J]. Aeronautical Manufacturing Technology, 2022, 65(9): 82-88.
白大山，陈五一，陈雪梅. 碳纤维增强复合材料/轻合金叠层结构制孔技术研究进展[J]. 航空制造技术, 2022, 65(9): 82-88. DOI： 10.16080/j.issn1671-833x.2022.09.082.

BAI Dashan，CHEN Wuyi，CHEN Xuemei. Research Advances in Hole Making Technology of Carbon Fiber Reinforced Plastics/Light Alloy Laminated Structure[J]. Aeronautical Manufacturing Technology, 2022, 65(9): 82-88. DOI： 10.16080/j.issn1671-833x.2022.09.082.

摘要

碳纤维增强复合材料/轻合金叠层结构已经被广泛地应用于航空航天及相关的工程领域。阐述了近年来国内外碳纤维增强复合材料/轻合金叠层结构制孔技术的研究进展与发展方向，重点剖析了叠层结构钻削机理、制孔缺陷、制孔质量影响要素等方面。为实现碳纤维增强复合材料/轻合金叠层结构优质高效制孔加工，提出叠层结构制孔切削热建模仿真、制孔缺陷预测与制孔过程智能控制等未来研究方向。叠层结构制孔研究的现状分析与展望将会对航空装配领域的技术进步起到重要的指导作用。

Abstract

Carbon fber reinforced plastics/light alloy laminated structure has been extensively used in aerospace and related engineering felds. The research advances and development trends at home and abroad in hole making technology of carbon fber reinforced plastics/light alloy laminated structure were reviewed

mainly analyzing laminated structure drilling mechanisms

drilling-induced defects and inﬂuence factor of hole making quality. In order to realize the high-quality and high-effcient hole making of carbon fber reinforced plastics/light alloy laminated structure

the future study directions such as the modeling and simulation of cutting heat

prediction for hole making defects as well as intelligent control of drilling process are proposed. The current situation analysis and prospection of hole making research of laminated structure will contribute to the advances in technology in the feld of aircraft assembly.

关键词

Keywords

references

Views

473

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design and Experimental Verification of Stitching Forming System for Rigid Sandwich Composite Preforms

Large-Distance Straight-Line Datum Construction Based on Laser Collimation

Dynamic Measurement Method for Shaft Deflection Angles in Helicopter Drive Systems

Electromechanical Behavior of Open-Hole Three-Dimensional Angle-Interlock Woven Carbon Fiber Reinforced Polymer Under Tensile Loading

Modulation of Pore Structure and Properties in Phenolic Aerogels by Cationic Polyelectrolytes

Related Author

No data

Related Institution

No data

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34462 Visits Today：409

⁰