Research Status and Development Trend of Blisk Polishing Technology

LI Wenhui; WEN Xuejie; LI Xiuhong; ZHANG Yan

doi:10.16080/j.issn1671-833x.2022.17.088

您当前的位置：

首页 >

文章列表页 >

Research Status and Development Trend of Blisk Polishing Technology

更新时间：2025-10-30

- Research Status and Development Trend of Blisk Polishing Technology
- Aeronautical Manufacturing Technology Vol. 65, Issue 17, Pages: 88-102(2022)
- 作者机构：
  
  1. 太原理工大学航空航天学院,晋中,030600
  2. 精密加工山西省重点实验室,太原,030024
  3. 太原理工大学机械与运载工程学院,太原,030024
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2022.17.088
  CLC：
- Published：2022
- 稿件说明：
移动端阅览
李文辉，温学杰，李秀红，张演. 整体叶盘抛磨技术研究现状及其发展趋势[J]. 航空制造技术, 2022, 65(17): 88-102.

LI Wenhui，WEN Xuejie，LI Xiuhong，ZHANG Yan. Research Status and Development Trend of Blisk Polishing Technology[J]. Aeronautical Manufacturing Technology, 2022, 65(17): 88-102.
李文辉，温学杰，李秀红，张演. 整体叶盘抛磨技术研究现状及其发展趋势[J]. 航空制造技术, 2022, 65(17): 88-102. DOI： 10.16080/j.issn1671-833x.2022.17.088.

LI Wenhui，WEN Xuejie，LI Xiuhong，ZHANG Yan. Research Status and Development Trend of Blisk Polishing Technology[J]. Aeronautical Manufacturing Technology, 2022, 65(17): 88-102. DOI： 10.16080/j.issn1671-833x.2022.17.088.

摘要

整体叶盘的表面完整性对航空发动机的服役性能和寿命影响巨大，而抛磨技术是用于实现整体叶盘成性制造的一类关键技术。针对整体叶盘成性制造后不满足使用要求的问题，从材料特性、结构特征、加工要求 3 个层面分析了整体叶盘的抛磨特点；综述了手工抛磨、数控抛磨、磨粒流抛磨、磁力研磨、滚磨光整加工的发展历程、研究现状和抛磨效果，对比分析了各类抛磨技术的优势与局限性。在此基础上，提出整体叶盘抛磨技术的发展趋势，即探索形性协同式、多工序组合式的抛磨工艺，实现抛磨工艺的智能决策化，并向绿色环保方向转型发展。

Abstract

The surface integrity of the blisk has a great influence on the engine performance and service life

and the polishing technology is the key technology to realize the blisk performance manufacturing. In view of the problem that the blisk does not meet the use requirements after forming and manufacturing

the characteristics of polishing were analyzed from three aspects of material characteristics

structural characteristics and processing requirements. The development history

research status and polishing effect of polishing technology were introduced from the aspects of manual polishing

numerical control polishing

abrasive flow polishing

magnetic abrasive finishing and barrel finishing. And the advantages and limitations of each polishing technology were compared and analyzed. On this basis

the development trend of the blisk polishing technology was put forward

to explore the precision and performance coordination type and multi-process combination type of polishing technology

to realize the intelligent decision making of the polishing process

and to the direction of green environmental protection.

关键词

Keywords

references

Views

141

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Trajectory Planning Method for Blisk Surface With Drum Grinding Wheel

Research on Design Method of Auxiliary Anode in Precision Electrolytic Machining of Blisk

Research on Forming Rule of Electrochemical Machining of Complex Cavity by Analysis and Experiments

Research on Deformation Control of Blisk Based on Reverse Segmented Machining

Research on Combined Machining Technology of Milling and Grinding of Blisk for Full Profile Finish Machining

Related Author

JIN Tan

SHANG Zhentao

LIU Kaifa

WANG Hu

YANG Yang

岳磊

程新想

赵建社

Related Institution

Hunan University

AECC South Industry Co., Ltd.

JITRI Institute of Precision Manufacturing Co., Ltd.

Nanjing University of Aeronautics and Astronautics

JITRI Institute of Precise Manufacturing

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34498 Visits Today：445

⁰