涡扇发动机转子系统装配过程PFMEA 技术应用研究

ZHOU Jianhua; ZHANG Faping; LI Yi; HE Shan

doi:10.16080/j.issn1671-833x.2023.01/02.101

您当前的位置：

首页 >

文章列表页 >

涡扇发动机转子系统装配过程PFMEA 技术应用研究

更新时间：2025-10-30

- 涡扇发动机转子系统装配过程PFMEA 技术应用研究
- Aeronautical Manufacturing Technology Vol. 66, Issue 1/2, (2023)
- 作者机构：
  
  1. 北京动力机械研究所,北京,100074
  2. 北京理工大学,北京,100076
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2023.01/02.101
  CLC：
- Published：2023
- 稿件说明：
移动端阅览
周建华，张发平，李伊，何山. 涡扇发动机转子系统装配过程PFMEA 技术应用研究[J]. 航空制造技术, 2023, 66(1/2): 101-106. ZHOU Jianhua,ZHANG Faping, LI Yi, HE Shan. 涡扇发动机转子系统装配过程PFMEA 技术应用研究[J]. Aeronautical Manufacturing Technology, 2023, 66(1/2): 101-106.

ZHOU Jianhua, ZHANG Faping, LI Yi, et al. 涡扇发动机转子系统装配过程PFMEA 技术应用研究[J]. Aeronautical Manufacturing Technology, 2023, 66(1/2).
周建华，张发平，李伊，何山. 涡扇发动机转子系统装配过程PFMEA 技术应用研究[J]. 航空制造技术, 2023, 66(1/2): 101-106. ZHOU Jianhua,ZHANG Faping, LI Yi, HE Shan. 涡扇发动机转子系统装配过程PFMEA 技术应用研究[J]. Aeronautical Manufacturing Technology, 2023, 66(1/2): 101-106. DOI： 10.16080/j.issn1671-833x.2023.01/02.101.

ZHOU Jianhua, ZHANG Faping, LI Yi, et al. 涡扇发动机转子系统装配过程PFMEA 技术应用研究[J]. Aeronautical Manufacturing Technology, 2023, 66(1/2). DOI： 10.16080/j.issn1671-833x.2023.01/02.101.

摘要

为了进一步提高涡扇发动机转子系统装配的可靠性，根据涡扇发动机转子系统的装配工艺特点，提出了一种针对转子系统装配的工艺故障模式影响分析方法。给出了转子系统装配的PFMEA 分析流程、PFMEA 分析对象，并以螺母装配工序和转子动平衡工序为例进行了PFMEA 分析，给出了典型的工艺故障模式，并提出相应的故障预防措施，以达到提高转子系统工艺可靠性的目的。为提高PFMEA 分析效率，实现转子系统装配工艺故障模式的有效管理，提出了PFMEA 分析系统，给出了系统的功能模块和实现方法。

Abstract

In order to further improve the reliability of the turbofan engine rotor system assembly

this paper proposes a process failure mode influence analysis method for the rotor system assembly based on the assembly process characteristics of the turbofan engine rotor system. The PFMEA analysis process and PFMEA analysis objects of the rotor system assembly are given

and the PFMEA analysis is carried out with the nut assembly process and the rotor dynamic balance process as examples. The typical process failure modes are given

and the corresponding failure prevention measures are put forward to achieve the purpose of improving the process reliability of the rotor system. In order to improve the efficiency of PFMEA analysis and realize the effective management of the failure mode of the rotor system assembly process

the PFMEA analysis system is proposed

and the functional modules and implementation methods of the system are given.

关键词

Keywords

references

Views

364

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on Green Assembly Technology for Airframe Structure and Its Key Implementation

Simulation Analysis on High-Pressure Rotor Connection Assembly of One Aero-Engine

Dynamic Measurement Method for Shaft Deflection Angles in Helicopter Drive Systems

Research on Ultrasonic Vibration-Assisted Milling and Grinding of Ceramic Matrix Composites

Electromechanical Behavior of Open-Hole Three-Dimensional Angle-Interlock Woven Carbon Fiber Reinforced Polymer Under Tensile Loading

Related Author

GUO Feiyan

XIAO Qingdong

ZHOU Chong

WAN Yuxin

SHA Xiliang

BAO Qiangwei

FENG Shuo

SUN Shanmin

Related Institution

School of Mechanical Engineering, University of Science and Technology Beijing

AVIC Manufacturing Technology Institute

AVIC Jiangxi Hongdu Aviation Industry Group Co., Ltd.

AECC Shenyang Liming Aero-Engine Co., Ltd.

School of Chemical Engineering and Technology, Xi’an Jiaotong University

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34462 Visits Today：409

⁰