Review of Titanium Alloy Plate Rolling Technology (Part 2)——Plate Forming Technology

ZHANG Zhixin; TANG Bin; LI Ruifeng; FAN Jiangkun; PENG Cheng; LIU Chuan; LI Jinshan

doi:10.16080/j.issn1671-833x.2023.16.014

您当前的位置：

首页 >

文章列表页 >

Review of Titanium Alloy Plate Rolling Technology (Part 2)——Plate Forming Technology

更新时间：2025-10-30

- Review of Titanium Alloy Plate Rolling Technology (Part 2)——Plate Forming Technology
- Aeronautical Manufacturing Technology Vol. 66, Issue 16, Pages: 14-28(2023)
- 作者机构：
  
  1. 西北工业大学重庆科创中心,重庆,401120
  2. 重庆三航新材料技术研究院有限公司,重庆,401120
  3. 西北工业大学凝固技术国家重点实验室,西安,710072
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2023.16.014
  CLC：
- Published：2023
- 稿件说明：
移动端阅览
张智鑫，唐斌，李瑞锋，樊江昆，彭程，刘川，李金山. 钛合金板材制备技术的现状及展望（下）——中厚板制备技术[J]. 航空制造技术, 2023, 66(16): 14-28.

ZHANG Zhixin, TANG Bin, LI Ruifeng, FAN Jiangkun, PENG Cheng, LIU Chuan, LI Jinshan. Review of Titanium Alloy Plate Rolling Technology (Part 2)——Plate Forming Technology[J]. Aeronautical Manufacturing Technology, 2023, 66(16): 14-28.
张智鑫，唐斌，李瑞锋，樊江昆，彭程，刘川，李金山. 钛合金板材制备技术的现状及展望（下）——中厚板制备技术[J]. 航空制造技术, 2023, 66(16): 14-28. DOI： 10.16080/j.issn1671-833x.2023.16.014.

ZHANG Zhixin, TANG Bin, LI Ruifeng, FAN Jiangkun, PENG Cheng, LIU Chuan, LI Jinshan. Review of Titanium Alloy Plate Rolling Technology (Part 2)——Plate Forming Technology[J]. Aeronautical Manufacturing Technology, 2023, 66(16): 14-28. DOI： 10.16080/j.issn1671-833x.2023.16.014.

摘要

梳理了钛合金中厚板制备技术的概况，整理了不同组织类型（等轴、全片层、网篮组织）钛合金中厚板轧制成形过程的控制要点，分析了钛合金中厚板制备技术的现状及问题，并给出了解决方案。通过梳理近α 钛合金、α + β钛合金和β 钛合金的制备工艺，分析板材轧制过程的显微组织和织构特征，对比不同组织类型板材的力学性能，提出了钛合金中厚板析出相、组织、织构及性能的调控方法，阐明了钛合金中厚板制备技术的关键控制要点，剖析了钛合金中厚板产品的现存问题，包括翘曲度问题、残余应力大、超声探伤水平不稳定性等，并给出了具体解决方案。最后，展望了国内钛合金板材制备技术的3 项研究重点和2 个发展方向，旨在推进钛合金板材关键产品的特种制造和常规产品的标准化作业水平。

Abstract

In this paper

the forming technology of titanium alloy plate was summarized

the control points of the rolling process of titanium alloy plate with different structure types (equiaxed structure

full lamellar

basket wave structure) were summarized

the present situation and problems of the forming technology of titanium alloy plate were analyzed

and the solutions are given. By combing the forming technology of near α titanium alloy

α + β titanium alloy and β titanium alloy

the microstructure and texture characteristics of rolling process of plate were analyzed

and the mechanical properties of plate with different microstructure types were compared. The control methods of precipitation

microstructure

texture and properties of titanium alloy plate were proposed

and the key control points of forming technology of titanium alloy plate were expounded. The existing problems of titanium alloy plate products

including warp degree problem

large residual stress

the instability of ultrasonic inspection level and so on

were analyzed

and specific solutions were given. Finally

three research priorities and two development directions of domestic titanium alloy sheet and plate forming technology were prospected in order to promote the specific manufacturing of key products and the standard operation level of conventional products of titanium alloy sheet and plate.

关键词

Keywords

references

Views

304

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Microstructure and Properties of TiC-Reinforced 7034 Aluminum Alloy Fabricated by Wire-Feed Laser Cladding

Investigation of HAZ and Its Influence of Laser Cutting 2A12 Aluminum Alloy

Influence of Laser Remelting for Back Weld on Microstructure Properties of High Speed FA–MIG Welded Ti/Al Joint

Microstructure and Properties of CuCrZr Fabricated by Laser Powder Bed Fusion

Microstructure and Properties of ZrC Enhanced Niobium Alloys Fabricated by Selective Laser Melting

Related Author

CHEN Jiawen

WANG Libo

MI Gaoyang

ZENG Guang

CHAO Jingyu

MA Xiuquan

武伟超

王永军

Related Institution

School of Mechanical Science and Engineering, Huazhong University of Science and Technology

School of Materials Science and Engineering, Huazhong University of Science and Technology

School of Materials Science and Engineering, Central South University

西北工业大学现代设计与集成制造技术教育部重点实验室

西安飞机工业（集团）有限责任公司

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34442 Visits Today：389

⁰