Calculation of Riveting Driving Force and Visualization System Design in Electromagnetic Riveting

DENG Jianghua; YAO Yujie; LIN Yongfeng; FAN Zhisong

doi:10.16080/j.issn1671-833x.2023.23/24.020

您当前的位置：

首页 >

文章列表页 >

Calculation of Riveting Driving Force and Visualization System Design in Electromagnetic Riveting

更新时间：2025-10-30

- Calculation of Riveting Driving Force and Visualization System Design in Electromagnetic Riveting
- Aeronautical Manufacturing Technology Vol. 66, Issue 23/24, (2023)
- 作者机构：
  
  福州大学,福州,350108
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2023.23/24.020
  CLC：
- Published：2023
- 稿件说明：
移动端阅览
邓将华，姚钰杰，林雍锋，范治松. 电磁铆接驱动力计算及可视化系统设计[J]. 航空制造技术, 2023, 66(23/24): 20-27. DENG Jianghua, YAO Yujie, LIN Yongfeng, FAN Zhisong. Calculation of Riveting Driving Force and Visualization System Design in Electromagnetic Riveting[J]. Aeronautical Manufacturing Technology, 2023, 66(23/24): 20-27.

DENG Jianghua, YAO Yujie, LIN Yongfeng, et al. Calculation of Riveting Driving Force and Visualization System Design in Electromagnetic Riveting[J]. Aeronautical Manufacturing Technology, 2023, 66(23/24).
邓将华，姚钰杰，林雍锋，范治松. 电磁铆接驱动力计算及可视化系统设计[J]. 航空制造技术, 2023, 66(23/24): 20-27. DENG Jianghua, YAO Yujie, LIN Yongfeng, FAN Zhisong. Calculation of Riveting Driving Force and Visualization System Design in Electromagnetic Riveting[J]. Aeronautical Manufacturing Technology, 2023, 66(23/24): 20-27. DOI： 10.16080/j.issn1671-833x.2023.23/24.020.

DENG Jianghua, YAO Yujie, LIN Yongfeng, et al. Calculation of Riveting Driving Force and Visualization System Design in Electromagnetic Riveting[J]. Aeronautical Manufacturing Technology, 2023, 66(23/24). DOI： 10.16080/j.issn1671-833x.2023.23/24.020.

摘要

电磁铆接是一种电磁力驱动加载的铆接技术，其铆接驱动力是影响铆钉成形质量的关键因素。为了掌握电磁铆接驱动力的变化规律，运用数学建模方法，简化电磁铆接驱动力求解过程，建立感应式与自激励式电磁铆接驱动力数值计算模型，并通过试验验证了模型建立的可靠性。同时利用MATLAB App Designer对电磁铆接驱动力计算进行了可视化系统的设计，实现了对电磁铆接驱动力的简便计算。基于该系统，以自激励式电磁铆接为例，分析了电参数对铆接驱动力的影响规律。研究结果表明，放电电压和电容的增加以及回路电阻和回路电感的减少，有利于提高自激励式铆接驱动力的峰值和变化速率。

Abstract

Electromagnetic riveting is a riveting technology that is driven by electromagnetic force

and driving force is the most critical factor affecting the forming quality of rivets. In order to master the influence law of driving force in electromagnetic riveting

the mathematical modeling method is used to simplify the solution process of driving force in electromagnetic riveting process

and the numerical calculation model of driving force in inductive and self-excited electromagnetic riveting is established. And the reliability of the numerical calculation model was verified by the experiment. At the same time

the MATLAB App Designer is used to design the visualization system for the calculation of the driving force of electromagnetic riveting

and the simple and convenient calculation of the driving force of electromagnetic riveting is realized. Based on this system

the influence law of the electrical parameters of the self-excited electromagnetic riveting is analyzed. The results show that the increase of discharge voltage and capacitance

and the decrease of loop resistance and loop inductance are beneficial to improve the peak value and change rate of the electromagnetic driving force of electromagnetic riveting.

关键词

Keywords

references

Views

204

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Development of Electromagnetic Riveting Gun Operated by Single Person

Study on Manual Electromagnetic Riveting Process and Riveting Quality of Composite Materials

Study on Electromagnetic Riveting and Tensile Performances of Large Diameter Steel Rivet

Development and Application of Electromagnetic Riveting Technology in China

Overview of Riveting Technology for Aviation Composite Structure

Related Author

ZUO Duquan

ZHANG Minghao

GUO Chengxing

CAO Yong

FAN Xifeng

TU Juncheng

WEI Yuhao

CHEN Chang

Related Institution

NPU Xu Hang Electromagnetic Technology Co., Ltd.

Northwestern Polytechnical University

Civil Aviation Flight University of China, Guanghan

AVIC Chengdu Aircraft Industrial (Group) Co., Ltd.

State Key Laboratory of Advanced Design and Manufacturing Technology for Vehicle, Hunan University

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34412 Visits Today：359

⁰