Analysis on Force-Thermal Behaviors and Chip Forming of CFRP/Ti Stacks Drilling

WANG Xianfeng; ZHOU Lei; AN Qinglong; CHEN Ming

doi:10.16080/j.issn1671–833x.2018.23/24.096

您当前的位置：

首页 >

文章列表页 >

Analysis on Force-Thermal Behaviors and Chip Forming of CFRP/Ti Stacks Drilling

更新时间：2025-10-30

- Analysis on Force-Thermal Behaviors and Chip Forming of CFRP/Ti Stacks Drilling
- Aeronautical Manufacturing Technology Vol. 61, Issue 23/24, (2018)
- 作者机构：
  
  1. 上海飞机制造有限公司,上海,201324
  2. 上海交通大学机械与动力工程学院,上海,200240
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671–833x.2018.23/24.096
  CLC：
- Published：2018
- 稿件说明：
移动端阅览
王贤锋，周磊，安庆龙，陈明. CFRP/Ti 叠层钻削力热行为与切屑成形分析[J]. 航空制造技术, 2018, 61(23/24): 96-101. WANG Xianfeng1, ZHOU Lei2, AN Qinglong2, CHEN Ming2. Analysis on Force-Thermal Behaviors and Chip Forming of CFRP/Ti Stacks Drilling[J]. Aeronautical Manufacturing Technology, 2018, 61(23/24): 96-101.

WANG Xianfeng, ZHOU Lei, AN Qinglong, et al. Analysis on Force-Thermal Behaviors and Chip Forming of CFRP/Ti Stacks Drilling[J]. Aeronautical Manufacturing Technology, 2018, 61(23/24).
王贤锋，周磊，安庆龙，陈明. CFRP/Ti 叠层钻削力热行为与切屑成形分析[J]. 航空制造技术, 2018, 61(23/24): 96-101. WANG Xianfeng1, ZHOU Lei2, AN Qinglong2, CHEN Ming2. Analysis on Force-Thermal Behaviors and Chip Forming of CFRP/Ti Stacks Drilling[J]. Aeronautical Manufacturing Technology, 2018, 61(23/24): 96-101. DOI： 10.16080/j.issn1671–833x.2018.23/24.096.

WANG Xianfeng, ZHOU Lei, AN Qinglong, et al. Analysis on Force-Thermal Behaviors and Chip Forming of CFRP/Ti Stacks Drilling[J]. Aeronautical Manufacturing Technology, 2018, 61(23/24). DOI： 10.16080/j.issn1671–833x.2018.23/24.096.

摘要

碳纤维增强复合材料(CFRP) 是一种以环氧树脂作为基体材料、碳纤维作为增强材料的复合材料，具有高强度、高比强度以及耐腐蚀性的特点。CFRP 与钛合金是航空航天领域广泛使用的两种轻质的材料，经常作为叠层结构出现在大型客机的关键部位，使大型客机制造装配过程中需要对CFRP/Ti叠层进行大量的制孔。而CFRP/Ti叠层钻削过程中的力热变化与切屑形态会直接影响刀具的切削状态。在此基础之上，对CFRP/Ti 叠层钻削过程中的力热行为与切屑成形进行研究，这对于CFRP-Ti 叠层实际钻削过程具有重要的指导意义。

Abstract

Carbon fiber reinforced polymer (CFRP) is a kind of material with epoxy resin as matrix material and carbon fiber as reinforced material

which has the characteristics of high strength

high specific strength and corrosion resistance. CFRPs and titanium alloys are two kinds of lightweight materials widely used in aerospace fields. CFRPs and titanium alloys often appear as laminated structures in the key areas of large passenger aircraft

which leads to a large number of hole-making of CFRP/Ti stacks in the manufacturing and assembly processes of large passenger aircraft. The variation of heat and force as well as chip shape in the CFRP/Ti stacks drilling process will directly affect the cutting state of the tool.Therefore

the study of force-thermal behavior and chip forming in the CFRP/Ti stacks drilling process was carried out in this paper

which has important guiding significance for the actual drilling process of CFRP-Ti stack.

关键词

Keywords

references

Views

379

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on Ultrasonic Vibration-Assisted Milling and Grinding of Ceramic Matrix Composites

Research Progress on Matrix Composition Regulation of SiC/SiC Composites

Dynamic Measurement Method for Shaft Deflection Angles in Helicopter Drive Systems

Electromechanical Behavior of Open-Hole Three-Dimensional Angle-Interlock Woven Carbon Fiber Reinforced Polymer Under Tensile Loading

Research Progress on In-Plane Shear Mechanical Behavior of Silicon Carbide Ceramic Matrix Composites

Related Author

No data

Related Institution

No data

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34573 Visits Today：51

⁰