Effect of Peening on Performance of Laser Beam Welding Structure of Al–Li Alloy

ZHANG Zenghuan; LI Hao; SUN Xiaofeng; CAO An

doi:10.16080/j.issn1671–833x.2019.12.036

您当前的位置：

首页 >

文章列表页 >

Effect of Peening on Performance of Laser Beam Welding Structure of Al–Li Alloy

更新时间：2025-10-30

- Effect of Peening on Performance of Laser Beam Welding Structure of Al–Li Alloy
- Aeronautical Manufacturing Technology Vol. 62, Issue 12, Pages: 36-41(2019)
- 作者机构：
  
  上海飞机制造有限公司,上海,201325
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671–833x.2019.12.036
  CLC：
- Published：2019
- 稿件说明：
移动端阅览
张增焕，李昊，孙小峰，曹安. 喷丸处理对铝锂合金激光焊接结构性能的影响[J]. 航空制造技术, 2019, 62(12): 36-41.

ZHANG Zenghuan, LI Hao, SUN Xiaofeng, CAO An. Effect of Peening on Performance of Laser Beam Welding Structure of Al–Li Alloy. Aeronautical Manufacturing Technology, 2019, 62(12): 36-41.
张增焕，李昊，孙小峰，曹安. 喷丸处理对铝锂合金激光焊接结构性能的影响[J]. 航空制造技术, 2019, 62(12): 36-41. DOI： 10.16080/j.issn1671–833x.2019.12.036.

ZHANG Zenghuan, LI Hao, SUN Xiaofeng, CAO An. Effect of Peening on Performance of Laser Beam Welding Structure of Al–Li Alloy. Aeronautical Manufacturing Technology, 2019, 62(12): 36-41. DOI： 10.16080/j.issn1671–833x.2019.12.036.

摘要

为解决铝锂合金焊后性能弱化问题，推进双激光束双侧同步焊接工艺在国产民用飞机壁板制造中的应用，研究了焊后喷丸、固溶时效热处理+ 喷丸处理两种共3组焊后强化工艺，通过静力拉伸、疲劳及表面应力状态测试分析，评估强化效果，探讨强化机制。结果显示：纯喷丸强化可显著提高疲劳性能，其中0.20mmN 喷丸后细节额定疲劳强度截止值DFR

cutoff

较焊态提高27.8%，但静力拉伸性能与焊态相差不大；0.36mmN 喷丸后DFR

cutoff

提高了118.5%，但抗拉性能明显下降；热处理+ 喷丸的组合强化工艺对静力拉伸及疲劳性能均有明显提升，抗拉强度较焊态提高32%，DFR

cutoff

较焊态提高21.9%，综合性能较好。

Abstract

In order to solve the problem of weakening of Al–Li alloy after laser beam welding (LBW) which is applied to a type of civil aircraft fuselage panel

three post–processing methods which were shot peening and heat–treatment + peening were studied. The tensile test

fatigue test and residual stress test were carried out to evaluate and reveal the strengthened effect and mechanism. The results show that fatigue performance is improved significantly but tensile property is reversed. The DFR

cutoff

values of 0.20mmN and 0.36mmN shot peening are increased by 27.8% and 118.5% compared to original welding state. Better overall performance is presented by heat–treatment of solution and aging + shot penning

which the tensile strength is increase

d by 32% and the DFR value is increased by 21.9% compared to initial state.

关键词

Keywords

references

Views

193

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design and Experimental Verification of Stitching Forming System for Rigid Sandwich Composite Preforms

Research Progress on In-Plane Shear Mechanical Behavior of Silicon Carbide Ceramic Matrix Composites

Research on Ultrasonic Vibration-Assisted Milling and Grinding of Ceramic Matrix Composites

Electromechanical Behavior of Open-Hole Three-Dimensional Angle-Interlock Woven Carbon Fiber Reinforced Polymer Under Tensile Loading

Modulation of Pore Structure and Properties in Phenolic Aerogels by Cationic Polyelectrolytes

Related Author

No data

Related Institution

No data

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34528 Visits Today：6

⁰