Research Development on Shrinkage Fraction Distribution of Investment Castings

BU Kun; ZHANG Yali; YU Qian; QIU Fei; TIAN Guoliang

doi:10.16080/j.issn1671–833x.2019.20.037

您当前的位置：

首页 >

文章列表页 >

Research Development on Shrinkage Fraction Distribution of Investment Castings

更新时间：2025-10-30

- Research Development on Shrinkage Fraction Distribution of Investment Castings
- Aeronautical Manufacturing Technology Vol. 62, Issue 20, Pages: 37-44(2019)
- 作者机构：
  
  西北工业大学航空发动机高性能制造实验室,西安,710072
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671–833x.2019.20.037
  CLC：
- Published：2019
- 稿件说明：
移动端阅览
卜昆，张雅莉，于茜，邱飞，田国良. 精铸件收缩率分布规律研究进展[J]. 航空制造技术, 2019, 62(20): 37-44.

BU Kun, ZHANG Yali, YU Qian, QIU Fei, TIAN Guoliang. Research Development on Shrinkage Fraction Distribution of Investment Castings. Aeronautical Manufacturing Technology, 2019, 62(20): 37-44.
卜昆，张雅莉，于茜，邱飞，田国良. 精铸件收缩率分布规律研究进展[J]. 航空制造技术, 2019, 62(20): 37-44. DOI： 10.16080/j.issn1671–833x.2019.20.037.

BU Kun, ZHANG Yali, YU Qian, QIU Fei, TIAN Guoliang. Research Development on Shrinkage Fraction Distribution of Investment Castings. Aeronautical Manufacturing Technology, 2019, 62(20): 37-44. DOI： 10.16080/j.issn1671–833x.2019.20.037.

摘要

空心涡轮叶片作为航空发动机的关键热端部件，通常采用近净形熔模精密铸造工艺制成，其成型质量偏低、废品率极高。首先介绍了熔模精密铸造技术在精确控形方面的研究现状，分析发现，在模具设计时收缩率赋值的准确与否直接影响精铸件的尺寸精度。然后概述了精铸件凝固过程收缩率的各影响因素，重点分析了收缩率的结构相关性研究进展。最后，总结了空心涡轮叶片等精铸件的收缩率分布规律研究成果。

Abstract

As the key hot end component of aero-engine

hollow turbine blades are usually made by near-net shape investment casting process

which has low molding quality and high rejection rate. Firstly

the research status of investment precision casting technology in “precise shape control” was introduced. It was found that the accuracy of shrinkage fraction assignment in mold design directly affects the dimensional accuracy of precision castings. Then

the influencing factors of casting shrinkage fraction during solidification process were summarized

and the research process of structural correlation of shrinkage fraction was analyzed emphatically. Finally

the research results of shrinkage fraction distribution of precision castings such as hollow turbine blades were summarized.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Dynamic Measurement Method for Shaft Deflection Angles in Helicopter Drive Systems

Modulation of Pore Structure and Properties in Phenolic Aerogels by Cationic Polyelectrolytes

Electromechanical Behavior of Open-Hole Three-Dimensional Angle-Interlock Woven Carbon Fiber Reinforced Polymer Under Tensile Loading

Research Progress on In-Plane Shear Mechanical Behavior of Silicon Carbide Ceramic Matrix Composites

Research Progress on Ceramic Matrix Composites for Aviation Applications

Related Author

No data

Related Institution

No data

The platform construction and operation are provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：34526 Visits Today：4

⁰