TC4激光选区熔化/同轴送粉成形连接的力学性能研究

玄明昊; 张瑞; 邢本东; 王向明

doi:10.16080/j.issn1671-833x.2021.01/02.082

您当前的位置：

首页 >

文章列表页 >

TC4激光选区熔化/同轴送粉成形连接的力学性能研究

研究论文 | 更新时间：2025-10-30

- TC4激光选区熔化/同轴送粉成形连接的力学性能研究
- 航空制造技术 2021年64卷第1/2期
- 作者机构：
  
  航空工业沈阳飞机设计研究所,沈阳,110035
- 作者简介：
- 基金信息：
- DOI：10.16080/j.issn1671-833x.2021.01/02.082
  中图分类号：
- 纸质出版：2021
- 稿件说明：
移动端阅览
玄明昊，张瑞，邢本东，王向明. TC4激光选区熔化/同轴送粉成形连接的力学性能研究[J]. 航空制造技术, 2021, 64(1/2): 82-88. XUAN Minghao, ZHANG Rui, XING Bendong, WANG Xiangming. Research on Mechanical Properties of Selective Laser Melting/Coaxial Powder Feeding Forming Connection. Aeronautical Manufacturing Technology, 2021, 64(1/2): 82-88.

XUAN Minghao, ZHANG Rui, XING Bendong, et al. Research on Mechanical Properties of Selective Laser Melting/Coaxial Powder Feeding Forming Connection[J]. Aeronautical Manufacturing Technology, 2021, 64(1/2).
玄明昊，张瑞，邢本东，王向明. TC4激光选区熔化/同轴送粉成形连接的力学性能研究[J]. 航空制造技术, 2021, 64(1/2): 82-88. XUAN Minghao, ZHANG Rui, XING Bendong, WANG Xiangming. Research on Mechanical Properties of Selective Laser Melting/Coaxial Powder Feeding Forming Connection. Aeronautical Manufacturing Technology, 2021, 64(1/2): 82-88. DOI： 10.16080/j.issn1671-833x.2021.01/02.082.

XUAN Minghao, ZHANG Rui, XING Bendong, et al. Research on Mechanical Properties of Selective Laser Melting/Coaxial Powder Feeding Forming Connection[J]. Aeronautical Manufacturing Technology, 2021, 64(1/2). DOI： 10.16080/j.issn1671-833x.2021.01/02.082.

摘要

对 TC4 选区熔化/同轴送粉成形连接件的拉伸性能和疲劳性能进行研究。通过对比不同线能量密度参数下拉伸试验数据，得到线能量密度对 TC4 成形连接件拉伸性能的影响规律。通过对比相同应力水平下成形连接件与母材的中值疲劳寿命和疲劳极限，获得成形连接件相对母材疲劳特性的衰减程度。采用当量 Kt 法对成形连接件的疲劳性能进行表征，得到成形连接件的当量应力集中系数 Kte。通过对比 TC4 成形连接件与 TA15 4 种焊接工艺的（Kte）50，发现较焊接工艺成形连接工艺，具有更优的疲劳特性。

Abstract

The tensile and fatigue properties of TC4 selective laser melting/coaxial powder feeding forming joints were studied. By comparing the tensile test data under different linear energy density parameters

the influence of linear energy density on the tensile properties of TC4 formed joints was obtained. By comparing the median fatigue life and fatigue limit of the formed joints and the base metal at the same stress level

the attenuation degree of the fatigue characteristics of the formed joints relative to the base metal is obtained. Equivalent Kt was used to characterize the fatigue properties of formed joints

and the equivalent stress concentration factor Kte of formed joints was obtained. Compared with the welding process

the forming connection process has better fatigue characteristics.

关键词

Keywords

references

浏览量

215

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

钛合金光纤激光焊接接头特征分析

电弧增材制造Ti–6Al–4V组织和力学性能调控研究进展

TC4 钛合金激光窄间隙焊接工艺与组织特征研究

TC4 钛合金静止轴肩和传统搅拌摩擦焊的温度场对比

双光束激光焊钛合金T形接头的组织特征与力学性能